Results 1 to 20 of 35
Threaded View
-
07-10-2010 #11
New to Pro-Touring
- Join Date
- Jul 2010
- Location
- Georgia
- Posts
- 3
Welding tubing
Just a quick comment for any newbies to roll cage fabrication. For the best structural weld it is important to have a perfect fit. If the notch angle is off practice a bit with scrap tubing until you get the proper angle.
As a last resort, if you have a small gap in one area you can lay a piece of welding rod in the gap before welding.
Scott
Fab Manager
Last edited by Larry Callahan; 07-10-2010 at 06:43 AM. Reason: Non sponsor link removed
-
Reply With Quote
