Results 1 to 20 of 27
Hybrid View
-
07-16-2009 #1
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Orlando, FL
- Posts
- 10,604
Ray,
That's interesting. Do the CW parts use a Delrin liner?
jp
John Parsons
UnRivaled Rides -- Modern upgrades for your ride.
UnRivaled Rides recent project -- LS9-powered 69 Camaro
-
07-16-2009 #2
Registered User
- Join Date
- May 2008
- Location
- Austin, Tx.
- Posts
- 1,539
Hey John,
I've taken one of the set screws out, unscrewed the end plate and looked at the internals... It has delrin material on both sides of the rotating ball...
Here is a picture of the internals from Chassiswork's catalog...
It's VERY similar...
What I really like about this setup is when wear occurs over time you would just replace the Delrin pieces. Before the point of needing replacement it looks like you could "freshen" up the feel by loosening the set screw, tighten the end plate one more "notch", and reinstall the set screw...Ray
FEW FRILLS, just BIG CHILLS!!!
1972 VW Bug (427LS/T56 Magnum/9"-3.70 gears)
18"x10-1/2" (315/30/18) Front, 18”x12" (335/30/18”) Rear
https://www.pro-touring.com/showthre...-Lady-Bug-quot
Reply With Quote
