Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 546

    Hybrid View

    1. #1
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      Quote Originally Posted by GregWeld View Post
      Jim --



      I'd be pulling the valve covers and checking for a broken valve spring.... a bad plug would be bad at lower rpms as well as higher. I had a BBC with a broken valve spring - it drove me nuts til I found it. Car ran perfect - until higher rpms and then it would start crapping out and sounded horrible... get off
      the gas and it ran perfectly again. Was hard to find the crack in the spring but the "oil" around the crack is what made me notice it.
      Hi Greg, I have the valve covers on the list of things to check under. I had a backfire the day before it started. The thing that is strange is that the car isn't starting right up like it always has, I have to blip the pedal and it starts right up otherwise it fires and than dies, The IAC seemed to really whistle the next day at start up and I was wondering if the backfire did something to it?
      We were talking at the local cuise night at McDonalds and a guy was telling us how he had a rocker stud that backed out and it was doing the same thing. You may be spot on about this. If that is all it is I hope the valve is alright. The car accelerates good otherwise.

      So much to do so little time.
      May The Horsepower Be With You !!!


    2. #2
      Join Date
      Nov 2009
      Location
      Bellevue, WA
      Posts
      63
      A good backfire can also bend a pushrod.... and that might cause a cylinder to go lean (not opening the valve enough) causing a lean miss... And yeah -- since the IAC is open to the intake it might have been damaged during this event. Which could explain the hard start.

      Got it fixed yet?

    3. #3
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      Quote Originally Posted by GregWeld View Post
      A good backfire can also bend a pushrod.... and that might cause a cylinder to go lean (not opening the valve enough) causing a lean miss... And yeah -- since the IAC is open to the intake it might have been damaged during this event. Which could explain the hard start.

      Got it fixed yet?
      I'm goin out to pull the valve cover in a little while. I too had thought about the pushrod being bent, I don't hear any slack type noises that are unuasual but the cover off will tell the story.

      Thanks for bein there and we will keep in touch, Jim
      May The Horsepower Be With You !!!




    Advertise on Pro-Touring.com