Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 546

    Hybrid View

    1. #1
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      What a weekend!!!!!!!

      I was having problems on wednesday with a driveline vibration that would vary and was at higher rpm. I couldn't find what it was and almost didn't go to the Motorstate Challenge. The car was running good and it would cruise just fine and had plenty of power with no vibration at less than 4000 rpm. I decided to drive to meet with everyone in Elgin and se then what to do? It made with no problems and I had plenty of help and a trailer if needed so I took the trip and it all went well.

      I found I really need some new tires. I just don't have the grip to keep up. The car pushes and needs to possibly have a rear sway bar to help it out. The car car drove great on the track and was a blast. The autox proved to be a bigger challenge for the tires and it really hurt me there. It would have been a bit better if I could have had another 3000 rpm at my disposal but it was fun.

      The cause of the vibration was discussed when I got to Michigan and the problem is the Centerforce pressure plate. the weights are obviously not returning to the middle exactly and causing the vibration. Other people have had the same problems so it is time to take the weights off and hope for the best.

      It was really nice to meet with everyone again and the cars at the vent were awesome. I met a lot of new people and learned a lot.

      Bad Penny wasn't there and I really missed seeing Dave Pozzi. i also was looking for a few others that didn't make it. The event is getting better and I can't wait for next year!!!

      Now I have a trans to pull and some weight to take off the car. It might only be a 1/2 pound but it the most important to lose because it will add 3000 rpm and who knows how much more power. it makes me wonder how we all keep these cars together sometimes.

      May The Horsepower Be With You !!!


    2. #2
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      I have been working on the closeout panel and have it pretty well done for now. I will have to modify it a bit for the final hinges when I get there but for now here it is.

      Next on the list is pulling the clutch out and getting to the problem it is having, what ever it is. I am interested in if it will be the weights on the pressure plate causing the vibration or if it is something else ?
      May The Horsepower Be With You !!!

    3. #3
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      Quote Originally Posted by Jim Nilsen View Post
      I have been working on the closeout panel and have it pretty well done for now. I will have to modify it a bit for the final hinges when I get there but for now here it is.

      Next on the list is pulling the clutch out and getting to the problem it is having, what ever it is. I am interested in if it will be the weights on the pressure plate causing the vibration or if it is something else ?
      Looks good Jim, I like the aluminum panels!




    Advertise on Pro-Touring.com