Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 546

    Hybrid View

    1. #1
      Join Date
      Oct 2004
      Location
      Charlotte, NC
      Posts
      795

      Dude!

      hate to hear about your motor. Read about it this morning and have been thinking of how to reply.

      Maybe the instructor killed the motor maybe he did not. I found when I was having my sump uncovered durning a corner my car would start sputtering and cutting out. maybe the motor was hurt before you bought it and hammering on it made it finally let go. We could what if this thing to death. We all beat up ourselves whe something happens and think of what we should have done something different. That is the way we learn not to make the same mistake twice. Sometimes no matter what you do it happens anyway as many a person on these forums have lost brand new professionaly built motors.

      As much as it sucks, you have to look at what happened and get a plan together and move on down the road. Now the biggest problem with advice the person giving it does not have the problem. LOL

      I do feel for you and I have been there myself.

      So what is your plan? My thought is get a motor in a soon as you can so you do not miss the rest of the driving season and the events you want to go to. Who cares if it makes 180 hp or 400 hp. As long as it is realiable and you are driving would be all that I would want. Spend the rest of the summer working out the bugs, IE your gas tank and the rest of the little things. Plan on doing the hot motor in the winter when you do not get to drive anyway. I bet you could piece another motor together stupid cheap and get by. 2 bolt main, cast crank, all used...you get the idea.

      Keep your head up as you know I am pulling for you. Remember how much fun you had before you lost the motor and how good it felt to have your long hard work appreciated. Focus on that for motivation.



    2. #2
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      Quote Originally Posted by Payton King View Post
      hate to hear about your motor. Read about it this morning and have been thinking of how to reply.

      Maybe the instructor killed the motor maybe he did not. I found when I was having my sump uncovered durning a corner my car would start sputtering and cutting out. maybe the motor was hurt before you bought it and hammering on it made it finally let go. We could what if this thing to death. We all beat up ourselves whe something happens and think of what we should have done something different. That is the way we learn not to make the same mistake twice. Sometimes no matter what you do it happens anyway as many a person on these forums have lost brand new professionaly built motors.

      As much as it sucks, you have to look at what happened and get a plan together and move on down the road. Now the biggest problem with advice the person giving it does not have the problem. LOL

      I do feel for you and I have been there myself.

      So what is your plan? My thought is get a motor in a soon as you can so you do not miss the rest of the driving season and the events you want to go to. Who cares if it makes 180 hp or 400 hp. As long as it is realiable and you are driving would be all that I would want. Spend the rest of the summer working out the bugs, IE your gas tank and the rest of the little things. Plan on doing the hot motor in the winter when you do not get to drive anyway. I bet you could piece another motor together stupid cheap and get by. 2 bolt main, cast crank, all used...you get the idea.

      Keep your head up as you know I am pulling for you. Remember how much fun you had before you lost the motor and how good it felt to have your long hard work appreciated. Focus on that for motivation.
      I hear what you are saying and am going to do the best with what I can find asap.
      The hard thing about what happened is that I spent a whole day with the instructor and hearing him tell me I had to get the fuel problem fixed so I didn't have it as a distraction and he told me he would not hurt my engine when he was driving it, then he forgot about it all when he was driving. I can tell you that he really liked the car and think he got a bit carried away at showing me what it could do for himself and I can't blame him for that because it was a blast to hang with the Vettes and other cars that I wasn't capable technically on the track to keep up with. We were going a conservative 25 to 30mph faster when he was driving in the straights and thru some of the corners and the kink we were catching up to the other cars. it gets addicting I think no matter who's car you are driving.

      I also had the thought several times that I wanted to pull it out and freshen up the rings because of the blow by. I also contributed to it subconsciously I think. I can think of several times I wanted to blow it up with dynamite and start over,lol.

      The sad thing was that the car would only lose a bit of power when it went way lean and was impossible to tell unless you checked the gauge. It was however right there in front of your eyes when you watched the tach. So if he wasn't looking he would not really have known it.

      It was very funny when he was missing 4th gear and getting 6th and realized how much I was at it than he was but it still is something that will take practice for anyone to drive it.

      When I get to concentrate on the reassembly I will be over it since the bad parts will not be slapping in the face. I really did just want to limp around and have fun more than be competetive but he wanted me to be a track racer and not a poser which is what his job was supposed to be in eyes.

      The best compliment he gave me was how safe he always felt when I was driving, he could tell I wasn't a hotdog and yet not so conservative to be last on the track. I know from experience that you can't go anywhere broke down and to be called slow is a matter of opinion. I did however let the mechanicals hold me back none the less and that bothered him a bit and at one time we thought we should get the car and me off the track because of the problems which would have put a damper on the fun for both of us but when you start to get a train behind you because of wechanical problems it sucks for everyone. I of all people know what it is like to be held back by a slower car.

      I know I will be glad to see it gone in more ways than one.

      As always I thankyou for your support and insights, you know what it is all about and keep me more focused and I need that in times of disparity.
      May The Horsepower Be With You !!!

    3. #3
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      I just went and looked at a 409 cu in 4 bolt main roller motor out of a car that caught fire because of a bad fuel line install. It is all apart because they were inspecting it. It looks like it is all ok and would go back together easy enough but it really needs to be gone over more than the L82 I have and I am hurting for time to say the least. The guy wants $1,000 for it. i would however be right back at the stage I was with the stock car motor not knowing what it has for a cam. without a bunch of work. We tried to look it up from the numbers on the cam and couldn't find anything, there is no manufacture name on it at all.

      I am getting a quote for a short block with a 4130 crank and h beam rods that will hold up to the punishment and I was told I could have it by the end of the week if I decide to go with it.

      So I am up to 3 choices and there is a place in California selling long blocks with much better heads and lower end also that I have to get a quote from making it 4.

      By tommorow I should have it all apart and know the whole amount of damage.

      I will hopefully be over feeling so upset by tommorow too.

      I do like the idea of the 409 cu. in. for more torque but I am not that keen on the roller cam specs for the EFI.

      I am still very tired from the weekend and am having trouble concentrating on it clearly with the anticipation of so many variables.

      Decisions , decisions, hmmmmmm what to do?
      May The Horsepower Be With You !!!

    4. #4
      Join Date
      Dec 2009
      Posts
      1,607
      Country Flag: United States
      Hey Jimmie --

      I started reading your thread from the beginning when you were having all your FI issues. You stuck with it and you beat it. It was no easy task and you ventured into a place you had never been before and conquered it. Just like your cancer. Which is WAY MORE IMPRESSIVE THAN FI, right?

      Ok, so now it's time to stop all the negative thoughts and move on. Jim, I've been there. Custom bikes that nothing fit on and I wanted it done right then and there, a 600 cu in blower motor dies (as in blew up) two minutes out of the harbor with a whole group of friends who travelled very far to have a fun weekend on the water....and don't get me started on that repair cost!

      You are a hell of a mechanic. Stop obsessing/losing sleep over it and make a repair plan. Do the right thing, no more shortcuts ever (the post above about getting an interim motor for the season is a good idea), and get the motor built in there that you want and can afford.

      As Gaetano would say "Gitter Done"...everyone on this board is pulling for you!

      Ron

    5. #5
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      I really want to thank all of you for supporting me through this.

      I realized that this is the first engine I have ever had blow up and I have tried to blow one up and couldn't one time , so it is really a new thing to get used to just like losing your first woman you thought you were in love with. I have to keep telling myself that the new engine will be a better one than the other and it is cheaper than divorce,LOL.

      The 1st relief so far !!! I just got done getting the top of the engine apart and the lifters all looked really good and from what I can tell the cam is good too. It turned from end to end so it didn't crack the cam either. I was most concerned about the one intake lobe that the rocker was a touch loose for what ever reason. I had relashed them all just before the drive and tune so I know they were good then. It was probably good when pumped up and as you all know I do obcess about things that are small to the detail.

      I have to take off the headers now to get to the head bolts and then we can see how the valves all look? I don't know if I will reuse the heads if they are good or swap out to something better. Some 190 cc runners would really move a lot more than the 160cc stockers and maybe be lighter if I go aluminum.

      So far it is looking as good as it could be. I do know that there is a place for water to go out somewhere because I didn't have to drain the radiator of much.

      Also on the bright side of things I will be able to get to a couple of other driveline nuances fixed up when I get the exhaust off , these had to get done sometime but weren't urgent. The car will be much better all around when it gets put back together. The extreme use of locktite is in the future of every nut and bolt. Damn car can shed them better than any machine I ever worked on, must be the 6400 rpm that makes them dance deep down and out.

      I am going to call it a day and get the heads off tommorow.

      The L82 shortblock is looking pretty good right now over anything else. The only shortcut about it is the rings, They were good when the engine was taken out of the car. I know that shortblock intimately and know that the assembly is rock solid and blueprinted right. It also has a ton of grinding and passage work done to the casting to make it stress relieved. The rods were also smoothed and polished to be as strong as they could be. It was good to 6000 rpm with no problem and the limitation was the cam and springs back then. The shop that did the work made it good to 7000 rpm just in case I would ever bump up the cam to something hotter.

      It will be interesting to see what is in the oil pan when it comes off and also what damage was totally done to it. It should be an easy fix for me but it is a Sunday oil pan with holy mother of a hole.



      May The Horsepower Be With You !!!

    6. #6
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      Here's a pic of the car in action.
      Attached Images Attached Images  
      May The Horsepower Be With You !!!

    7. #7
      Join Date
      Jun 2006
      Location
      NW burbs IL
      Posts
      1,732
      Nice pic Jim

      Hey take some pics of the post mortum and post them up, I think it will help with closure.
      Matt


      Current project: " Chain Reaction "

      A.K.A. " BIG " by wife, biatch in garage.

      1969 RS Camaro L92 T56 Quadra-link, CW sub, Ford 9" a progressive build.

      Ex track car: 1995 Camaro LS1 T56

    8. #8
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      here you go Matt, the carnage.

      I didn't think the pan took it that hard but damn it is a mess. it's nothing I can't fix but it sure will take a patch instead of a hammer back and weld moment.

      The number one spark plug electrode was bent but no damage to the piston. On the other side it was the number 2 piston that went to lunch and it slightly bent the intake just like I thought when the rocker was just a bit loose,now I know why.

      I can get the valve fixed if I use the heads and it won't take much to do it. The block is really gone on the number 2 piston.

      The thing that is weird is that there was water in the number 3 piston hole? How or why it was there is a mystery to me. It was about 2 or 3 oz. at most but it was there.
      Last edited by Jim Nilsen; 05-11-2010 at 04:13 PM.
      May The Horsepower Be With You !!!

    9. #9
      Join Date
      Sep 2007
      Location
      Denver
      Posts
      325
      Country Flag: United States
      ouch...poor guy. I feel for you. I know you were chasing EFI issues and maybe what caused this was at least partially what your gremlin was. Good luck man. Probably a new block in order....unless you super check/magnaflux that one. Does it look your new cam is ok?
      David Beckstrom DVM

    10. #10
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      Quote Originally Posted by Jim Nilsen View Post
      Here's a pic of the car in action.
      Awesome. the best pics are teh ones when you see the car in action.

    11. #11
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      I am just finishing up the exhaust and fire the car up and the power just went out.


      I have enough daylight that I might be able to keep going and get it done

      and so it goes..........
      May The Horsepower Be With You !!!

    12. #12
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      IT'S ALIVE

      Got it up and running and it sounds good. The tune seems to be good still and it is adding just a bit more fuel to compensate but only a few percent.

      Now I have to break it in for another 15 to 20 minutes ,change the oile and filter,put the wheels back on and set it back down on the ground. The hood and grille have to go back in and it's ready for a drive.

      I will be looking for the place to put the Accusump and getting it hooked up so it can do its job.

      The fuel supply is hopefully going to work for now.


      It's time for a beer

      May The Horsepower Be With You !!!




    Advertise on Pro-Touring.com