Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 546

    Hybrid View

    1. #1
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      I've tried a few more times today and still no results.

      I'm moving on to putting the car together and the EMIC missed his chance to do his job while the fenders were off. I can't fathom how someone can not need $500 as soon as they can make it these days? For that kind of money I would lose sleep and drive 100 miles ASAP. I am hoping he can make it on monday.



    2. #2
      Join Date
      Dec 2005
      Location
      Maryland
      Posts
      1,863
      Country Flag: United States
      Jim,most (not all) Systems feed the injectors hot all the time and pulse the ground out of the pcm.If it is irratic,it really sounds like a lifted ground some were.That can be one of the hardest things to find.Check with a voltmeter if the injectors have power when the key is on,that way you know if it is pcm negative feed or pcm pos. feed.At least then,you know if your chasing a ground or a pos.,and you don't waist alot of time looking in the wrong direction.Ron
      Ron Schwarz

    3. #3
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      Quote Originally Posted by Ron S View Post
      Jim,most (not all) Systems feed the injectors hot all the time and pulse the ground out of the pcm.If it is irratic,it really sounds like a lifted ground some were.That can be one of the hardest things to find.Check with a voltmeter if the injectors have power when the key is on,that way you know if it is pcm negative feed or pcm pos. feed.At least then,you know if your chasing a ground or a pos.,and you don't waist alot of time looking in the wrong direction.Ron
      Thanks for the tip, it will make it a lot easier to find knowing that.

      I am going thru and doing a complete check of all of the systems and I will be getting to the EFI by tommorow morning so that it is all fresh in my mind when the EMIC arrives and it will give me a chance to think things out a bit more with all of the things that have been tried.

      I talked to Mike Holleman for about 1/2 an hour and went thru what has been done and it comes down to several things we have already done but can still be a problem if the voltage to the ecu is not enough from his experience.

      When the problem is solved it will be interesting to know what it was.

      Thanks again and I hope to see you with my car at RTTH.

    4. #4
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      Just did a system check on the DCC controller with the heat gun and it works like a dream. The water pump starts nice and smooth and ramps up just like advertised and the fan does the same. I have the biggest capacitors I could fit in and they seem to do a good job.

      Bled the brakes one more time just to be sure and the pedal is just a bit better than it was. After a week of sitting I got a few small bubbles to come out and that's it.

      Checked all of the lines for leakes and don't see any in the fuel,brakes ,or cooling system. Power steering seems good but won't really know for sure until the pump starts up with the engine.

      It looks like the time for the fenders to come down off of the wall and find their real home.

      I have a few places that still need some Damplifier on them.

      I have to make the wiring harness for the fuel pump and some wiring for the headlights ,horns and the turn signals once the front clip is on and hope that the EFI wiring is really ok and that my problems are elsewhere like programming.

      I'll be ordering parts first thing in the morning to finish the list of small items I need like seatbelts and mirrors.

      I am going to have to rely on my own alignment for the suspension to get it out the door and down to RTTH if I don't get running by tuesday. Wednesday will be a thrash if things go good.

      I don't want to miss anything so if you guys see something questionable in the pics I am going to post don't be shy to tell me.

      I keep telling myself others have made it with less time and more to do. Things won't be all done for the interior but then again it will drive just fine with wire ties and duct tape as some of you have proven to me,lol.

      I think I can..................
      Last edited by Jim Nilsen; 09-13-2009 at 05:44 PM.

    5. #5
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      Well it's been a morning that has led me to another option to try with the wiring after talking to Dave at Accel so I will be trying that soon.

      I also found another number to someone close to me in Byron IL. that has to call me back when he gets the message I left.
      The guy who says he can help that I have been trying line up a time doesn't think he can get here until thursday which is tool late for the RTTH trip.

      I am praying that the next time thru will get me going.

      Dave at Accel also informed me that if I have an older dual sync distributor that I only have to go past the first red light and then lock down instead of thesecond one.

      So if I go back and set the distributor like I had been and hook up the wires the way he says which between the two ways I have been doing things but not at the same time maybe things will be alright.

      I am going to go thru it in my mind about 3 times and then give it a try after doing the injector test that Ron has instructed me how to do.

      I would really be the happiest guy to get it started without having to pay $500 to get it started.

      So close yet so far away.

      I haven't set up the camera yet at startup time and maybe it's time to get the tripod out and go for it. It would be so cool to have start up for the first time and have a video clip of it.

      The suspense is getting to me as to when it will fire up.




    Advertise on Pro-Touring.com