Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    View Poll Results: Which engine to go with?

    Voters
    73. You may not vote on this poll
    • GM 480hp LS3, still need wiring

      26 35.62%
    • GM 525hp L92, still need wiring

      25 34.25%
    • Mast Motorsports 480hp LY6, includes their controller

      16 21.92%
    • Give me an idea on another set up

      6 8.22%
    Results 1 to 18 of 18
    1. #1
      Join Date
      Dec 2007
      Location
      British Columbia, Canada
      Posts
      723
      Country Flag: Canada

      What engine to go with?

      So I am undecided what engine I should go with. I'm currently building a pro-touring 68 Acadian (exact same thing as a Nova for those that don't know). It will be used 99% of the time on the street with the goal of getting it to the track one day to see how it does. I want a motor that will be as close to or over 500hp as possible. I know I want to do a LS conversion, and here's what I been debating about lately. Keep in mind these are Canadian prices.

      Choice one is the GM 480hp LS3 crate engine. I can get it for about $6800 CDN. Engine is all aluminum and comes with car intake. Still would need to get a wiring kit for it.

      Choice two is a L92 with cam and intake upgrade putting it to about 525hp. Will run about $7800 CDN. Engine I believe is all aluminum and has LS3 heads. Still would need to get a wiring kit for it.

      Choice three is a Mast Motorsports LY6 with 480hp. Can get it with a car intake upgrade for about $8500 CDN. Engine has a cast block with LS3 heads. Comes with the Mast wiring controller which is apparently really easy to hook up. Engine is already broken in on the dyno.



      Choice four...help me out if you think there's a better option for around the same pricing.

      If you do make a selection or have an opinion, I would really appreciate it if you told me why you think I should go that route. I don't know much about LS engines at all so this is all a learning experience and any info would be greatly appreciated.


    2. #2
      Join Date
      Jan 2009
      Posts
      343
      i would go with choice 3. you get all the stuff you will need from one saler which in my experiances makes things alot easier on you.

    3. #3
      Join Date
      Mar 2008
      Location
      Mayfield, KY
      Posts
      162
      L92, but see Frank at Prodigy for pricing. I believe $4800USD would be about $5500CAN + freight. Hell, even at $1000USD for freight it would still be your cheapest route. Plus Frank can hook you up with everything thing you need to install.

      See this post https://www.pro-touring.com/forum/sh...ad.php?t=55115
      Rod Keeling
      '67 Camaro Mast L92 / 4L80E (work in progress)

      http://www.hubgarage.com/mygarage/RodDawg

    4. #4
      Join Date
      Dec 2007
      Location
      British Columbia, Canada
      Posts
      723
      Country Flag: Canada
      Thanks for the input guys. RodDawg...that L92 that I have in my choices is the one from Frank with some upgrades to get it to 525hp.

    5. #5
      Join Date
      Mar 2008
      Location
      Mayfield, KY
      Posts
      162
      Rod Keeling
      '67 Camaro Mast L92 / 4L80E (work in progress)

      http://www.hubgarage.com/mygarage/RodDawg

    6. #6
      Join Date
      Oct 2008
      Posts
      49
      do not buy an engine with out first looking at a dyno sheet ! you may not be happy with 500 hp and only 400 ft/lbs tq, where does the engine start building power? whats it rev limit? does it have a rev limiter? where's the crossover point on the dyno? at what rpms? remember your going to loose hp/tq at the rear wheels.
      68 ss clone 350 sbc 430hp, 69 454LSX (in progress@ jakes)650 hp ,70 rs 454 mp500efi 550 hp

    7. #7
      Join Date
      Feb 2007
      Location
      USA, TN
      Posts
      850
      Scherp,

      An LS480 with a carb intake and EzEFI. Should be able to get over 500 HP pretty easily.

      You could also get the Mast Motorsports controller for the LS480. I think they get more HP out of it.

    8. #8
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States
      Your question is impossible to answer without knowing the intended use of the car. I'm working on two LSx engined, first generation Camaro projects.

      One is intended to be a pro-TOURING car, with 5,000 mile plus cross country trips definitely in its future. For that car I've chosen a GMPP 376/480 with the GMPP harness and controller, GMPP accessory package and a Viper six speed. Given GM's notion of 480hp (they run them at WOT for hundreds and hundreds of hours to "prove" the viability of the combination), the engine is designed to live a long time with only routine maintenance. The lift on the cam is only 0.525"/0.525" so the entire valve train is under stressed, particularly with the hollow stem intake valves of the LS3 heads. I pretty much expect OEM type reliability out of this driveline package.

      On the other hand, my - so far - undocumented '67 project is intended more for local mountain driving and HPDE's. It's getting a fairly worked LS1 - big heads, cam in the 0.610" lift range, shaft rockers, headers, LS6 intake, P&P throttle body, etc. - that should be more powerful, but more maintenance intensive, than the larger displacement engine in the '68. For example, I've read that when you're running 0.600"+ lifts, you should replace (or at least check) your valve springs every 30,000 miles or so. I don't think I'll need to do that with the engine in the '68, I'll plan on it for the engine in the '67.

      So it all comes down to what you want to do with the car. For me, the '68 needs to be as reliable as a brick, the '67 can be more high strung.
      Last edited by Mkelcy; 02-17-2010 at 10:29 PM.
      Mike Kelcy - '68 Camaro with some stuff done to it.

    9. #9
      Join Date
      Oct 2009
      Location
      Sleepy Hollow,IL
      Posts
      336
      Give Jeff Schwartz a call at http://www.schwartzperformance.com/
      He does 580 hp LS-3's for around $10k plus wiring harness. He is going to do one of them for me in the future.
      Everything Under the Sun is Intune
      Chris
      http://www.popularhotrodding.com/fea..._am/index.html

    10. #10
      Join Date
      Mar 2010
      Location
      Central IL
      Posts
      258
      Quote Originally Posted by AJSZR2326 View Post
      where's the crossover point on the dyno?
      I can answer that one for him, it is always 5252rpm.
      Sean

      The difference between stupidity and genius.... genius has limits

    11. #11
      Join Date
      Jul 2003
      Location
      Anaheim Hills, CA
      Posts
      11,967
      Country Flag: United States
      I have a new alum 5.3L for sale. 490ish hp

      $4000 + ship
      "A ship in port is safe, but that's not what ships are built for."

      1968 Track Rat Camaro:
      https://www.youtube.com/watch?v=SGHJ5c1yLIo&t=2s

      1971 Chevelle Wagon with a few mods:
      https://www.youtube.com/watch?v=WBVPR3sRgyU

    12. #12
      Join Date
      Aug 2006
      Location
      San Francisco, CA
      Posts
      808
      Country Flag: United States
      Mike, are you looking at EFI only, or is a carb'd Gen IV under consideration as well?
      Steven

      1968 Camaro: Project "TRACKDAY"

      Latest Track Weekend Video

      Build in Progress

    13. #13
      Join Date
      Sep 2004
      Location
      savannah,ga
      Posts
      862
      Country Flag: United States
      BUILD ONE. Get a 6.0, put it in the machine shop, buy some new ls3 heads from your local dealer, I paid 686.00 for a pair of them, source the other parts from ebay or where ever, they are abundant and in good condition from what I found and purchased, a fellow on ls1tech named Patrick Guerra can spec a cam for you, he has a very solid track record of doing this for many, me included. I'll have about 2500.00 in the engine. should produce approximately 500 hp at the flywheel. The crate motors are nice just a lot more than a competent rebuild.

    14. #14
      Join Date
      May 2008
      Location
      Toronto
      Posts
      213
      Country Flag: Canada
      What dealer can you get the LS376/480 for $6800?
      The best price I got was $7300.

      The other option is the GM LS376/525.
      It's the same engine with a larger cam.

      Both of these engines have a specific harness and computer package for just over $1000.

    15. #15
      Join Date
      Sep 2004
      Location
      Metamora, Illinois
      Posts
      1,620
      Quote Originally Posted by keithq69 View Post
      What dealer can you get the LS376/480 for $6800?
      The best price I got was $7300.

      The other option is the GM LS376/525.
      It's the same engine with a larger cam.

      Both of these engines have a specific harness and computer package for just over $1000.
      Here http://paceperformance.com/i-6255558...te-engine.html


      Also check your local GM dealer....one local to me has a new LS3/480hp crate engine for $6399 plus tax.

    16. #16
      Join Date
      Sep 2011
      Location
      Eagle Point, Oregon
      Posts
      66
      Quote Originally Posted by Tom Welch View Post
      BUILD ONE. Get a 6.0, put it in the machine shop, buy some new ls3 heads from your local dealer, I paid 686.00 for a pair of them, source the other parts from ebay or where ever, they are abundant and in good condition from what I found and purchased, a fellow on ls1tech named Patrick Guerra can spec a cam for you, he has a very solid track record of doing this for many, me included. I'll have about 2500.00 in the engine. should produce approximately 500 hp at the flywheel. The crate motors are nice just a lot more than a competent rebuild.
      I agree with this guy (its what I'm doing) and if you are scared of the wiring, which is admitedly the most intimidating part there are a number of people on here that could fix you up with "plug'n'play" harness and custom tuned computer. Also the cast iron blocks are boost friendly if you get "bored" with 500hp

    17. #17
      Join Date
      Dec 2009
      Location
      HOUSTON TEXAS
      Posts
      40
      Country Flag: United States
      I agree with MrBlaze and the other poster as well. Spend your saved money on a good Transmission. Build the engine.

      Yes you will do a little running around but if you have a good machine shop he can generally put you where you wanna be. Imho its always better to know what you got in it because you put it there than someone elses word.

      As stated you can get a plug and play harness and computer.

      THink Dominator Efi

    18. #18
      Join Date
      Jan 2014
      Location
      Seattle WA
      Posts
      288
      Country Flag: United States
      Not to derail this but.... Mopac had a picture of a nice Acadian on their Facebook page a month or so ago. Yours?
      1967 El Camino 408ci LSx....and the build begins!
      1967 Turbocharged 408ci LSx Chevelle - 1012 rwhp, 959 rwtq 67 Chevelle
      2009 Supercharged Silverado - On the Dyno




    Advertise on Pro-Touring.com