Results 1 to 4 of 4
Thread: Distribution block
-
04-25-2009 #1
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
Distribution block
Okay, so the distribution block from my elky was sitting in a box with snipped-off bits of brake line attached, so I don't know what goes where.
It's pretty obvious that the two lines from the MC go into the top, where the connector for the brake light goes.
I'm going to hazard a guess that the large connector on one end goes to a larger line that goes to drive the rear brakes, and that the other, smaller connector end and the bottom are for the front brakes? Do I have that right?
Block is from a 69 El Camino with drum/drum brakes.
-
04-25-2009 #2
Registered User
- Join Date
- Aug 2005
- Location
- Patterson, NY
- Posts
- 784
Sounds right. That's how it was on my '78 Camaro.
Jason Scheer
-
05-06-2009 #3
Registered User
- Join Date
- Aug 2004
- Location
- Holmes Hollow, Ontario Canada
- Posts
- 991
Are you staying with drum brakes and will the block work with discs?
____________________________________________
Scott
05-07-2009 #4
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
On this one I'm staying drums.
Reply With Quote
