Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 13 of 13
    1. #1
      Join Date
      Aug 2008
      Posts
      54

      Pro Street/Pro Touring Suspension

      As I continue my endeavors moving forward towards my build, I start seeing Pro Street cars, and get myself thinking how pointing straight and going fast gets me almost as excited as being able to carve the curves.

      I see many Pro Touring cars that look like they could almost be Pro Street, and vice versa. I am wondering if there would be a way to have a setup that could do both well, and if anyone has any ideas as to the best suspension setups to do both.



      I would love to hear anybody's ideas, even pics of rides. I would love to have two cars, one for each, but unfortunately there is a limit to budgets!

      Thanks all!


    2. #2
      Join Date
      Apr 2009
      Posts
      57
      as far as power they could and would have the same setup, for the look, you would need a different set of wheels and tires. also you would need smaller brakes for the smaller wheels needed to run slicks or DRs.

      you could run an air ride setup to raise the rear suspension for the look but not so certain it would perform well as a drag racing setup.

      i dont know about suspension setups as far as performance goes, but i know that it would be different

    3. #3
      Join Date
      Jul 2007
      Location
      Los Angeles, CA
      Posts
      1,303
      Maybe a Art Morrison setup with air ride. Definitely like nightrunner said different set of rims/tires. And with the air ride system you could tune your front/rear spring rates depending on application.

    4. #4
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      OK.. I guess its a point of view what is a PS or a PT. For me.... PS is a large tired car (the back) and maybe some skinnys up front. 4-link in the rear and the front could be stock. The look if thats all you go by would be the tires. But if you talk to a PT guy its more than the look, its about balance and having the car handle the turns as best as it can.

      My car?? Well, I wasnt looking for either, at first, I just wanted to replace the crappy suspension that was under it, a 62 Nova. So in 1995 there wasnt anything available as far as "kits". So I welded in an Art Morrison rear 4-link, narrow frame. Think PS. And a MII front end.

      Now I am changing my view. The AM rear clip was just too narrow. Coilovers (if you want to call them that) 24" apart, pan hard bar, 24" in length. Made for a real "swoopy" ride through the streets.

      So... I ditched the coilovers, made new mounts for air ride, cut out the pan hard bar and made a watts link. Put in a sway bar. Now thats the rear, DONE finally. So Im off to raise the front end and see what it needs, not much really, air ride will go there too, a sway bar and some 13" CPP brakes.

      But IMO my car will be considered a PT now rather than what it was, a PS. OH.. It all comes down to the tires and rims. 17x10" billet specialties with some nice goodyear meats.

      I think Its the looks for PS and the performance for PT. JR

    5. #5
      Join Date
      Aug 2004
      Location
      Ontario, Canada
      Posts
      2,314
      Country Flag: Canada
      It seems to me that Penny was a Pro Street build when Steve bought her, but there isn't much of the PS equipment left on her.
      If you were looking for a dual purpose car, I would say build it as a Pro Touring car first. After that it is mostly a matter of making adjustments to your suspension to do well at the strip. If you just want the Pro Street look, then you would just need wheels and tires with some ride height adjustments. There are some large diameter tires out there that will fit 17 and 18 inch wheels (think sport truck). This would let you achieve the big and little tire combo while still clearing your larger PT brakes.

      Ken
      If there is a hard way to do something, I'll find it!
      My other car is a Vega.

    6. #6
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      I am basically going for that same theme with my falcon, I want the best of both worlds.

      So what i decided as the best is coilovers all the way around, DUH. But with different spring rates for different track conditions, Drag/AutoX...

      The front i built my own double A-arm suspension (with a 20.5 in shock for wheel stands). The difference between turning and straight will be tuning my double adjustable AFCO coilovers, drag=no sway bar and maybe a lighter spring to reduce weight.

      Out back i decided on a three link that is really adjustable maybe four mointing points at each connection point(chassis and rearend). The three link will be the same as a four link for set up but will require a extremely stiff rear sway to prevent the torque from unloading one wheel. This sway will be to stiff for the autoX (close to no body roll) so an adjustable sway arms will be designed, i am thnking something with a cockpit controlled adjustment. the next would be a watts or a panhard for autox if you have limited travel in the back a panhard will work fine with less weight than a watts the only negative is the car will react slighlty differently depending on the direction of turning. Again a double adjustable coilover with an array of spring rates (springs are the cheapest tuning out there) to match the track conditions. The coilovers will give adjustable ride height so you can fit larger diamter tires even an adjustable coilover mounts will help this.

      I know long post.......

      Finally for tires, decide whats the most important for you, If you need a big brake then the tire for drag will be a little harder to find and more expensive, also will have a smaller footprint if its on a 17" wheel compared to a 15"

      i am going to go with two set of wheels, 15"=drag and 17"=street/AutoX.
      Since my car only weighs 2700lbs i am using 11.75' wilwoods all the way around. these are the biggest for a 15" wheel.

    7. #7
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      Quote Originally Posted by Falcon Fellow
      Out back i decided on a three link that is really adjustable maybe four mointing points at each connection point(chassis and rearend). The three link will be the same as a four link for set up but will require a extremely stiff rear sway to prevent the torque from unloading one wheel. This sway will be to stiff for the autoX (close to no body roll) so an adjustable sway arms will be designed, i am thnking something with a cockpit controlled adjustment. the next would be a watts or a panhard for autox if you have limited travel in the back a panhard will work fine with less weight than a watts the only negative is the car will react slighlty differently depending on the direction of turning. Again a double adjustable coilover with an array of spring rates (springs are the cheapest tuning out there) to match the track conditions. The coilovers will give adjustable ride height so you can fit larger diamter tires even an adjustable coilover mounts will help this.
      It seems you've thought this through. Nice analysis. My 3 link has such adjustment to allow IC changes to change anti-squat to allow for a better bite off the line. I haven't ever even taken my car to drag strip, so I don't know how well it will work.

      As you also said, it will be hard to get a big brake on the car and still support a 15/16" wheel and a drag radial.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    8. #8
      Join Date
      Aug 2008
      Posts
      54
      Thanks for all of the ideas. I haven't begun any work yet, I am just in the preliminaries. As we all know, it helps to have an idea of where you want to go before diving in. How many stories have we heard (and how many of them are our own) of the project changing 4-5 times as we go? I am trying to prevent that as much as possible. Thanks again guys. The falcon is looking great!

    9. #9
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      one wheel option is to go with a big brake wheel in the front and limit the brakes size in the back to a 15" wheel. This would give a funny look at the strip but would perform better.

      You cant see your car while you are driving it but you can tell when its running good. so doesnt performance matter the most? who cares if it looks like a race car and cant perform?

    10. #10
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      Thanks cmarcus. My car has been a 9 year project, I bought it as a DD when i was 16 and have slowly been building it. I have changed themes many many times. HAHA

    11. #11
      Join Date
      Dec 2006
      Posts
      285
      I'm doing much the same.

      Love both PT and PS, my car is a mix of both, it really doesn't meet the full criteria of either, but meets some of the criteria of both.

      68 Camaro
      632 cube BBC
      Art Morrison front end
      320mm disc brake front end
      17" x 7" rims (245 x 45 x 17)
      4" ride height

      rear end is a ford 9". 3.55 geared, 35 spline axles, detroit locker
      minitubbed, but custom (not DSE) due to tyre sidewall height
      17" x 11" rim, 325 x 45 x 17 M&H drag radial. Lots of side wall
      4 link with panhard bar
      again 4" ride height
      310mm discs on rear (so can't run a 15" tyre if I wanted to)

      adjustable QA1's all the way round

      couple of pics





      Chris Luxford

      68 Camaro 632 BBC

      61 Buick Lesabre - Daily Driver

      06 Prius - Wife's a tree hugger !

    12. #12
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States

    13. #13
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      I like cars with sidewall. wheels only need to be big enough to clear the brakes. and a 14" brake can fit into a 17" wheel.




    Advertise on Pro-Touring.com