Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Jan 2006
      Location
      Snohomish, Washington
      Posts
      2,235
      Country Flag: United States

      Engine Mount question G-Body to A-Body?

      Would the mounts from a 79 Monte carlo bolt on to a 66 A-Body Frame?

      Matt


    2. #2
      Join Date
      Feb 2008
      Location
      Sesser, Il
      Posts
      490
      A quick check at Rock Auto confirmed what I was thinking. The 79 MC uses the clamshell type where the rubber part of the mount mounts to the frame. The 66 uses the rubber part that mounts to the engine. Completely differant. I don't think they are interchangable either.
      Doug Gulley

      66 C10 383, AFR 190, Accel SuperRam, Hyd Roller 230*/236* 280XFI, aftermarket T56, *under construction*

    3. #3
      Join Date
      Jan 2006
      Location
      Snohomish, Washington
      Posts
      2,235
      Country Flag: United States
      hmm, alright thanks.
      Matt

    4. #4
      Join Date
      Dec 2006
      Location
      So Cal
      Posts
      920
      Pontiac A-body V8 engine mounts are all the same from '64 -72. Same goes for the frame stands that bolt to the front crossmember. All of the 326/350/389/400/428/455 engines use the same mounts and stands.

      Before anyone corrects me, the factory '70 -'72 455 mounts and stands are wider and specific to factory 455 A-body installations, but these 'special' 455 mounts aren't needed to install one.

      As already stated above, G-body engine mounts won't work.
      Bart F.


      '64 Tempest - LS3/4L70E - Grandma's Poor-Touring car
      '64 GTO - 455 HO/TH400 - Ex-bracket racer, street bruiser
      '02 WS6 convert - LS1/4L60E - Pure stock, pure pleasure




    Advertise on Pro-Touring.com