Linkage...help, Power Booster

[MrQuick]

Hey Craig, without knowing what you have makes it difficult to help but I'll give it a shot...
The booster to master rod. make sure your master has the right booster with it. Some booster will have a long pushrod that goes with the master with a deep push rod hole.I usually adjust the rod till I get a 1/16" air gap.You can use a set of calipers to measure this.
Now the booster to pedal rod. The booster should already have the rod attached hopefully an adjustable one.On the pedal there should be 2 sets of holes.1 is for the manual master and he other is for the power brake. If there isn't a pair of holes you'll have to get the right pedal or drill it yourself. In some instances you'll have to lengthen the rod. Go to Lowes and get a 3/8"x 4" tube nut to use as an extension,i'd recommend cutting it to your required length and tack weld it on.A couple spots will do. There was a discussion and pictures of this on the old forum. I can't find it now. maybe someone can dig up their pictures???