Results 1 to 20 of 29
Hybrid View
-
03-27-2009 #1
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,838
Be sure to check if the speedo uses a direct feed from the transmission or if the signal is conditioned in the ECU before going to the speedo. The ECU in later cars (LS1) use a 4000 pulse per mile signal. It can be fiddled with in the ECM, but the speedo must have the capability of reading 4000ppm. Your boneyard speedo may physically fit, but before going to far you may want to determine what input signal it needs and if you can supply it.
Shannon had to tune mine, even though it was new, to get it to sweep properly.
VaporWorx. We Give You Gas http://www.vaporworx.com
-
Reply With Quote
