Results 1 to 8 of 8
Thread: PRW Stainless Rockers ?
Threaded View
-
03-22-2009 #1
Registered User
- Join Date
- Dec 2006
- Location
- Cypress, TX
- Posts
- 330
PRW Stainless Rockers ?
I just purchased a Pontiac 455 that had been in storage for the last 5 years. I took it back to the original builder to get freshen up. While it was down, I wanted the heads flowed and everything giving the once over. Then they were going to dyno it the following week. He remembered the motor very well. I received a call Thursday telling the motor needed a new set a rocker as they had to much play. So he took the liberty to order a set of PRW stainless rockers. Then he asked for my carb and wires, which were dropped off with the motor. So they finally located my Barry Grant 1050 and the wires. At this time I asked for my flow # on the heads. They didn't flow the heads and already assembled the motor.
Does anyone have any feed back on the PRW Stainless Rockers? Haven't heard much off them. After not flowing the heads, misplacing the carb, wires and then ordering rockers before talking with me, I'm not sure if I want them to Dyno the motor or not..
The rockers are for Elderblock ported and polished heads.
Thanks-Sims
-
Reply With Quote
