Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 14 of 14
    1. #1
      Join Date
      Feb 2009
      Location
      Long island, New York
      Posts
      668

      roll cage material

      hey guys, what is the type of tubing and standard size of roll cage tubing? thanks-dom

      Dom Buffa
      69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas




    2. #2
      Join Date
      Feb 2008
      Location
      Denver NC
      Posts
      288
      Country Flag: United States
      You said it right in your post..... DOM 1 3/4 .083-.090 or 4130

    3. #3
      Join Date
      Feb 2009
      Location
      Long island, New York
      Posts
      668
      lol thanks i kinda thought it was but i was just making sure
      Dom Buffa
      69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas



    4. #4
      Join Date
      Apr 2005
      Location
      Fife, WA
      Posts
      887
      DOM is the standard in road racing while mild steel and 4130 is the deal in NHRA action. Mild steel is good for cars down to 7.50 (if I remember correctly) while the 4130 is good for the 25-1C certification (any car faster than 7.50 seconds).

      If you reference both rule books (SCCA & NHRA) you should be able to design a cage that will work for both groups.

    5. #5
      Join Date
      Dec 2006
      Location
      Out of the Burbs of Detroit to SoCal, then onto my ancestral homeland, the woods of Cascadia
      Posts
      1,753
      Country Flag: United States
      Remember that cage tubing diameter and wall depends on vehicle weight for SCCA...
      Greg Fast
      (yes, the last name is spelled correctly)

      1970 Camaro RS Clone
      1984 el Camino
      1973 MGB vintage E/Prod race car
      (Soon to be an SCCA H/Prod limited prep)

    6. #6
      Join Date
      Feb 2009
      Location
      Long island, New York
      Posts
      668
      i was wondering if it is hard to fab a 6 point cage from scratch because i got the material at a good price due to a connection i have! i have welding experience and always seem to make things work. what do u guys think??
      Dom Buffa
      69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas



    7. #7
      Join Date
      Jun 2007
      Location
      Huntington Beach, CA
      Posts
      624
      Check out Mike at MCC. He sells a pre-bent kit.

      https://www.pro-touring.com/forum/sh...light=mcc+roll
      Rick
      -----------------------------
      " Better to Be Lucky than Good "

    8. #8
      Join Date
      Feb 2006
      Location
      Idaho Falls, Id
      Posts
      1,341
      Hey guys, I've been trying to learn more about roll cages too. It seems like I've heard some arguments that 4130 is not good for cages do to the need to heat treat it after welding. Is that right?
      Traven

    9. #9
      Join Date
      Dec 2006
      Location
      Out of the Burbs of Detroit to SoCal, then onto my ancestral homeland, the woods of Cascadia
      Posts
      1,753
      Country Flag: United States
      Look at the Lincoln website for welding 4130. Usually not a problem if torch welded rather that Tig or Mig.

      Personal hero, Carroll Smith, specifically reccomends againts using 4130. IIRC, there is no advantage in SCCA class racing using 4130 (need same diameter and wall), and there is no advantage in elastic modulus for 4130. Only improvement is ultimate tensile- and is it worth the effort and cost?
      Greg Fast
      (yes, the last name is spelled correctly)

      1970 Camaro RS Clone
      1984 el Camino
      1973 MGB vintage E/Prod race car
      (Soon to be an SCCA H/Prod limited prep)

    10. #10
      Join Date
      Mar 2007
      Location
      Florida
      Posts
      2,391
      Country Flag: United States
      I went through the whole 4130/DOM deal when getting my cage a couple months back. The sanctioning bodies are recommending DOM for cages for cars like ours. The possibility of failures due to embrittlement is one of the reasons. They're not requireing DOM but if you ask they recommend DOM. The best thing to do is get the rules and regs for any of the sanctioning bodies you might run with.

      As was mentioned above vehicle weight determines whats required for diameter and wall thickness. Here's a couple links

      http://www.lateral-g.net/forums/show...light=chromoly

      https://www.pro-touring.com/forum/sh...ad.php?t=48151

    11. #11
      Join Date
      Sep 2006
      Location
      Southern Indiana
      Posts
      4,709
      Country Flag: United States
      Last time I read the rules most mild steel cages required .137 wall dom and the moly can be thinner but all welds need tig welded from info I have received. Check NHR
      A website for rules.
      Big issue with moly is its brittle and can be crack prone over the years from flex.
      Buddy just had his drag car recertified and its all mild steel Alston Pro Gas chassis and they rewelded a few joints, and inspected others and added some gusset plates and a 10t o15 yrs old car is ready for duty again.

    12. #12
      Join Date
      Jul 2005
      Location
      Mountain View, CA
      Posts
      9,583
      Country Flag: United States
      Quote Originally Posted by Twentyover View Post
      Remember that cage tubing diameter and wall depends on vehicle weight for SCCA...
      x2

      You can find the required thickness' per vehicle weight in the SCCA and NASA rulebooks. That is the guideline I would go with.
      True T.

      Whats new with Project 1/2-Trak?


      Follow my wisecracks on Sports, Food, Politics and other BS on Twitter.

      My blog

      When they kick out your front door, How you gonna come?
      With your hands on your head, Or on the trigger of your gun?

    13. #13
      Join Date
      Feb 2009
      Location
      Long island, New York
      Posts
      668
      i sent a email to mike at mcc yesterday and i haven`t got any response, hes probably busy. but i decided to just buy a cage from him because fabbing my own would just be a headache, and i dont need anymore. im going with a four point with the removeable harness bar for now. does anyone know a better way to get in touch with mike at mcc??
      Dom Buffa
      69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas



    14. #14
      Join Date
      Dec 2002
      Location
      Lost Wages, Nevada
      Posts
      2,684
      Country Flag: United States
      4130 is a waste of time and considerable money... unless you heat treat the ENTIRE chassis... which, you wont be doing.

      Most "open" standards will require a minimum of 1 5/8" x 0.120" mild steel. However, as stated it will depend on if you have any sanctioning body rules to deal with. If it's just a street car... I would follow the "open" standards at the minimum.

      I, myself... would recommend 1018 or 1020 seamless DOM with a minimum wall thickness of 0.120 for 1 5/8"... or... 0.95 for 1 3/4".




    Advertise on Pro-Touring.com