Results 1 to 1 of 1
Thread: Help w/Prop Valve
-
08-22-2004 #1
Registered User
- Join Date
- Aug 2004
- Location
- Just outside Ann Arbor, MI
- Posts
- 136
Help w/Prop Valve
I bought a 4 wheel kit from Inline tube for my car and have the lines connected and now just need to bolt up the Master cylinder and connect the prop valve. Problem is that the Prop valve did not come with any bolts to connect it to the bracket and I am not 100% certain on the orientation of the bracket itslef. I have emailed inline's support email about 100 times with a question on the bolts to use, and to confirm the orientation of the valve, but they have yet to come back with anything. Is the orientation in the picture correct (assuming the assembly was rotated to bolt the bracket to the 2 bolts on the master cylinder)? Can anyone tell me how to find the bolts i need as they appear to have a special shoulder on them.....
Thanks!
Dion
67RSSS502
-
Reply With Quote
