Results 1 to 8 of 8
Threaded View
-
02-24-2009 #1
Registered User
- Join Date
- Dec 2008
- Location
- Albany, Ga
- Posts
- 13
B-body spindles and bumpsteer (again)
this is a quote from a recent thread that got me thinking...
Originally Posted by DAK
Lower the inner tierod.
Warning if you do chicken **** welding don't try this at home.
when installed on a G-body or S-series, lowering the centerlink will improve the bumpsteer issue, correct?
what if you used a pitman arm and idler arm that would lower the center link? I think 4wd s10s have a steeper angle on the arms that could accomplish this, but if this is not the case, could the pitman/idler from another car work? possibly a Camaro or the B-body? Maybe even some jeeps?
just wanted to throw that out there... I could be way off.
-
Reply With Quote
