Results 1 to 9 of 9
Thread: Anti Seize
-
02-12-2009 #1
New to Pro-Touring
- Join Date
- Jul 2006
- Posts
- 2
Anti Seize
Anyone know where I can get some aluminum anti seize online that has an applicator like shoe polishes. The site only sells to distribtors and they told us Fastenol carried it but the representative that comes to the shop can't or won't even try too.
http://antiseize.net/
-
02-12-2009 #2
Registered User
- Join Date
- Aug 2004
- Location
- England
- Posts
- 1,042
Hi what do you need it for
-
02-12-2009 #3
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,120
locktite makes anti-seize in a stick.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
02-12-2009 #4
Registered User
- Join Date
- Aug 2004
- Location
- England
- Posts
- 1,042
check ebay number 360125601716
-
02-12-2009 #5
Registered User
- Join Date
- Jun 2007
- Location
- Huntington Beach, CA
- Posts
- 624
Summit Racing
Rick
-----------------------------
" Better to Be Lucky than Good "
-
02-13-2009 #6
Registered User
- Join Date
- Jan 2005
- Location
- Boonville, Missouri
- Posts
- 924
Anti-sieze, the stuff that always make it to the cheech of your rear end. Always.
Try you local Industrial power transmission supplier (pulleys, belts, electric motors) They should have it for far less than summit.
-
02-13-2009 #7
Registered User
- Join Date
- Dec 2006
- Location
- Out of the Burbs of Detroit to SoCal, then onto my ancestral homeland, the woods of Cascadia
- Posts
- 1,753
http://www.molyslip.com/Products/Copaslip.html
Prefered by english race car mechanics 3-1Greg Fast
(yes, the last name is spelled correctly)
1970 Camaro RS Clone
1984 el Camino
1973 MGB vintage E/Prod race car
(Soon to be an SCCA H/Prod limited prep)
-
02-13-2009 #8
Registered User
- Join Date
- Apr 2003
- Location
- Central Valley, CA
- Posts
- 910
...especially for the fasteners holding the covers over their Lucas electrical bits.
Originally Posted by Twentyover
Sorry, I had to.
1969 Chevelle
Old setup: Procharged/intercooled/EFI 353 SBC, TKO, ATS/SPC/Global West suspension, C6 brakes & hydroboost.
In progress: LS2, 3.0 Whipple, T56 Magnum, torque arm & watts link, Wilwood Aero6/4 brakes, Mk60 ABS, vaporworx, floater 9" rear, etc.
-
02-15-2009 #9
Registered User
- Join Date
- Sep 2006
- Location
- Southern Indiana
- Posts
- 4,709
First of all the best antisieze would be nickle based not aluminum. Standard old Permatex Silver antisieze works unless your dealing with aircraft(aircraft graded required) or titanium(then use copper based) or ultrahigh heat then look at the copper based products from Permatex or Versa-Chem.
Aluminum isnt a good antisieze agent as it corrodes much to easily. BUT may be useful in some limited areas, but then for 99% of any uses the silver(nickel based ) stuff works perfectly fine.
-
Reply With Quote
