Results 1 to 4 of 4
Thread: Timing Setting
-
02-05-2009 #1
Starting The Transformation
- Join Date
- Nov 2007
- Location
- Pittsburgh,pa
- Posts
- 252
Timing Setting
Not PT but what is the timing set at on a 1994 full size blazer. 350 cu. And where is the plug you have to disconnect? It is not under the hood. Thanks for any help!
-
02-05-2009 #2
-Moderator-
- Join Date
- Apr 2001
- Location
- Central CA USA
- Posts
- 6,114
I had a full size 1991 Blazer, there was a brown wire with black stripe under the panel on the pass side of the engine, on the firewall.
The radiator support has a tag with the timing specs, sold the blazer so I don't recall the timing specs.Last edited by David Pozzi; 02-10-2009 at 10:53 PM.
David Pozzi http://www.pozziracing.com67 Camaro RS that will be faster than anything Mary owns.
02-06-2009 #3
Registered User
- Join Date
- Aug 2004
- Posts
- 362
timing
If it is not under the hood then it is a single brown wire, maybe with a black stripe, coming out of the harness under the glove box area. Unplug it, start the engine and set initial timing to 0 on the pointer, shut off engine, plug wire in and restart engine.
02-09-2009 #4
Registered User
- Join Date
- Jan 2006
- Location
- Garwin, Iowa
- Posts
- 241
Should be under the hood behind the plastic cover on the passenger side firewall. Tan wire with a black stripe, disconnect start engine and set timing to 0 degrees.
Reply With Quote
