Results 1 to 4 of 4
Thread: Pinion bumper on First Gens
-
03-04-2005 #1
Registered User
- Join Date
- Aug 2004
- Location
- Annapolis, MD
- Posts
- 451
Pinion bumper on First Gens
I know this is not a very technical question about drivetrains, but is there some trick to getting the over-pinion bumper installed on a first gen Camaro? I have tried everything from greasing it and whaling on it with a rubber mallet to no avail, anyone have a trick for this???
-
03-06-2005 #2
Registered User
- Join Date
- Aug 2004
- Location
- CHICAGO SUBURBS
- Posts
- 761
Pinion snubber
Lube it with WD 40 and start one side and pust the rest in carefully with a small thin dull bladed screwdriver. That's how I'd do it. FRANK
03-06-2005 #3
Registered User
- Join Date
- Sep 2001
- Location
- Accord, NY
- Posts
- 2,295
I used some aeroquip hose lube (handy!) and ditto on the small screwdriver. Make sure it's dull.
69 Camaro convertible, 410, M22, 8-pt cage therapy program. SOLD.
68 camaro - SOLD
67 Bel Air - New street project with perfect floors, frame and trunk!
03-07-2005 #4
Registered User
- Join Date
- Aug 2004
- Location
- Annapolis, MD
- Posts
- 451
Thanks, I will see if that works, I was hesitant about using a screwdriver for the obvious reason, but I will see if I can get this thing installed tonight.
Reply With Quote
