TPI Runner Dents

[COPO-RAT]

Anyone know of a good way to remove dents from TPI Runners? A kit you can buy, a shop that provides the service, and home remedy etc.
Any help would be greatly appreciated!

[Andrew McBride]

http://cgi.ebay.com/ebaymotors/_Car-...1%7C240%3A1318

Never used these personally, but I have heard of people using them.

[COPO-RAT]

Andrew,
I have actually seen that kit on ebay and I have it saved. Just wanted to check and see if anyone had anything else that they have tried/used etc.
That kit seems awfully reasonable to me......probably what I'll end up doing, just wanted to test the waters.
Thanks for the info!

[BBPanel]

I'd like to know how it works - how difficult do you think it will be to cram a steel ball down those runners (just how do you do that - its not a straight shot) let alone make them larger.

[COPO-RAT]

I'm not 100% sure, but I think the kit comes with some wooden balls that you force in behind the machined steel ball with the steel ball doing the actual dent removal.

[TPI Monte SS]

One of the guys on another forum I belong to used that kit and it worked pretty well for him. Not that expensive either, if you wanted to give it a shot. The sellers feedback looks good, so no worries there.