Holley 4150

[kenhaw]

I have an irritating problem

My mods are as follows.

Chevy 350 Fastburn w/hot cam kit

Procharger F1, Carb Shop Holley 4150

My problem is that the engine stalls when I brake hard.

I have jet extensions on the secondary jets ( installed by the Carb Shop)
I also tried to install the same on the primary jets, but no luck so I will remove those again.

Any ideas? This is not only irritating but also dangerous to drive with.

Thx in advance

Kenneth

[kenhaw]

Sorry about this guys, I am a f..... idiot.

All I had to do was to call The Carb Shop and they ofcourse told me what to do, which btw is lowering secondary floatlevel by about 1/8 ".

Kenneth

[Windycity1]

I was going to tell you the same thing the carb shop recomended.

[Shaker455]

I do not recomend running jet extension on the street.

[kenhaw]

Why is it a bad idea to run with extension on the street?

[kenhaw]

just to let everybody know. Lowering the secondary float level fixed my problem. I am so happy with this easy fix.
Thx