Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 18 of 18

    Hybrid View

    1. #1
      Join Date
      Oct 2006
      Location
      Corona, CA
      Posts
      1,948
      Country Flag: United States
      What are you trying to fit up?



      I do my measuring the old school way with straight edges and a plumb line. That and a little math has gone a long way in fitting customers cars. If you like, give me a call sometime and I can talk with you about how to measure your car.


    2. #2
      Join Date
      Jul 2006
      Location
      Keller, Texas
      Posts
      250
      I'd only make one if it was one of the pro style where you could actually mount a tire to it. I have one of the percy's tools and it works great. Cool thing is that it is marked with backspacing, offset, wheel widths, etc. Easier to setup than a homemade on for sure. Nothing against the homemade ones or old school style, but for $75 you can't go wrong. Buy it, use it, then sell it for $50.
      Greg
      1970 challenger convert-in process
      1970 barracuda-driver

    3. #3
      Join Date
      Sep 2008
      Location
      Kathleen, GA
      Posts
      159
      Quote Originally Posted by gkring View Post
      but for $75 you can't go wrong. Buy it, use it, then sell it for $50.
      ...or just rent me yours

    4. #4
      Join Date
      Feb 2005
      Location
      Waterloo, Ia
      Posts
      1,408

      re

      Honestly by the time you rent one from somone for 25 bucks, ship it to your place and ship it back you probably wont be saving much, and you wont have the wheel fitment tool at the end of it. Maybe you could buy it, use it and sell it on ebay for 1/2. Or sell it on here, im sure somone will buy it if the price is right. Heck if you buy one and use it id probably buy it from you via pay pal as long as i was paying less than the price new shipped to my door. Wait.... let me check into the product before we get carried away!!
      -Nick
      -1967 GTO I drive and race
      -Build threads:
      -http://forums.maxperformanceinc.com/forums/showthread.php?t=615847&page=23
      -https://www.pro-touring.com/showthre...project-thread


    5. #5
      Join Date
      Aug 2007
      Location
      Snohomish,Wa.
      Posts
      364
      Quote Originally Posted by Novaguy73 View Post
      Honestly by the time you rent one from somone for 25 bucks, ship it to your place and ship it back you probably wont be saving much, and you wont have the wheel fitment tool at the end of it. Maybe you could buy it, use it and sell it on ebay for 1/2. Or sell it on here, im sure somone will buy it if the price is right. Heck if you buy one and use it id probably buy it from you via pay pal as long as i was paying less than the price new shipped to my door. Wait.... let me check into the product before we get carried away!!

      ^ Co-Signed. I realize that times are tough for most of us right now, but renting this tool will cost you half or more than what it will take to buy it. If you dont want to own it after you use it once or twice, I'm sure that you can sell it here or somewhere else to recoup most of your investment. Step up to the plate Mr nickeld_ck.:bsjerk:
      Roger

    6. #6
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      Quote Originally Posted by 72tunaboat View Post
      ^ Co-Signed. I realize that times are tough for most of us right now, but renting this tool will cost you half or more than what it will take to buy it. If you dont want to own it after you use it once or twice, I'm sure that you can sell it here or somewhere else to recoup most of your investment. Step up to the plate Mr nickeld_ck.:bsjerk:
      Or just MAKE one for the cost of electricity to weld it up LOL Mine will do everything that that over priced piece of cast aluminum will do. And it got here quicker too. Have I lost the idea of folks willing to do stuff for them selves?? Why buy that thing when you could do the same with some 1/8" wood board. That thing is nice for the guy in a coat and tie that doesn't get out in the shop much. But for any guy doing things for himself its a laugh. Spend yer money on tools that work. Not tools that appear to work. JR

    7. #7
      Join Date
      May 2000
      Posts
      4,151
      Country Flag: United States
      Quote Originally Posted by JRouche View Post
      Or just MAKE one for the cost of electricity to weld it up LOL Mine will do everything that that over priced piece of cast aluminum will do. And it got here quicker too. Have I lost the idea of folks willing to do stuff for them selves?? Why buy that thing when you could do the same with some 1/8" wood board. That thing is nice for the guy in a coat and tie that doesn't get out in the shop much. But for any guy doing things for himself its a laugh. Spend yer money on tools that work. Not tools that appear to work. JR
      Cast Aluminum, ha. It's a flimsy piece of plastic. I have one, seems to work ok, but should cost around $20.

    8. #8
      Join Date
      Sep 2008
      Location
      Kathleen, GA
      Posts
      159
      Quote Originally Posted by DriverzInc View Post
      What are you trying to fit up?

      I do my measuring the old school way with straight edges and a plumb line. That and a little math has gone a long way in fitting customers cars. If you like, give me a call sometime and I can talk with you about how to measure your car.
      17x9 wheel for a 64 Chevelle, measurin aint the problem, I could visualize it better with one of those fancy tools...thanx for the offer




    Advertise on Pro-Touring.com