Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9
    1. #1
      Join Date
      Jul 2006
      Location
      Hackettstown, NJ
      Posts
      1,026

      Tube bending in solidworks

      this is probably an easy thing to do but I can't figure it out. I can do it in AutoCad, but not in SW. I have a curved centerline and would like to extrude or make it into a pipe. Think of handle bars or cages. I have SW 2007.



    2. #2
      Join Date
      Jul 2005
      Location
      Eastern Virginia
      Posts
      3,965
      Country Flag: United States
      I am SW illiterate, but I know in Unigraphics NX there is a command called TUBE that allows you to specify an OD & ID & then select the string of curves to create around. By chance is there a command called that in SW?
      Scot
      86 Monte SS


    3. #3
      Join Date
      Aug 2004
      Location
      Nixa, MO
      Posts
      41
      Country Flag: United States
      I don't use SW either (we use Inventor), but look for a command called Sweep. You'll need both your curve (Path) and a shape (Profile).

      Luke

    4. #4
      Join Date
      Jan 2006
      Location
      Appleton,WI
      Posts
      164
      I've been trying to figure that out also. I'd like to make a curve with a 2x3 rect tube.

    5. #5
      Join Date
      Jul 2006
      Location
      Hackettstown, NJ
      Posts
      1,026
      There is a tutorial in SW that demonstrates profiles (tube) along a path. It is under advanced designs I believe. I have not read it, but will try it tomorrow if I am able. Time to get my drink and killer fruit(fruit bowl w/ rum and grain) on.

    6. #6
      Join Date
      Jan 2005
      Location
      McMinnville, TN
      Posts
      498
      It's extremely easy to do. I'll see if I can write something up for you. Once you see it, you'll say DOH!!
      Looking for a new project

    7. #7
      Join Date
      Aug 2007
      Location
      west michigan
      Posts
      514
      Country Flag: United States
      You just 3d draw it as a line. go to the endpoint. draw the tube shape and size. pierce it to the center then sweep.

      the tutorials in solidworks are pretty good. There is one in there where you make a wire rack and it uses the same principals.
      Chad Read

    8. #8
      Join Date
      Jul 2006
      Location
      Hackettstown, NJ
      Posts
      1,026
      I think I figured it out. pretty simple. Thanks for the help fellas. I did the rack tutorial and used that as a learning example.

      1. sketch 3d line beginning at origin. Tab to change axises (XY, XZ, YZ, ect) if needed.
      2. close 3D sketch by clicking '3D sketch'
      3. right plan and sketch circle with ID of tube.
      4. close sketch
      5. Sweep and use 'thin' feature to input wall thickness.
      click the check thingy and walla, you have a tube.

      BOOYA

    9. #9
      Join Date
      Jan 2005
      Location
      McMinnville, TN
      Posts
      498
      Yep that's it.
      Looking for a new project




    Advertise on Pro-Touring.com