Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2008
    Location
    Mid Mich
    Posts
    62

    Accel DFI 6.0 Sequential

    I have an Accel DFI 6.0 Seqential system 74060 that I purchased new in 1999. I am finally getting time (and money) to use it and cant get any info. I have tried contacting DFI in Wixom, MI and have only got the run around. Looking to use it on an 18* 421 SBC w/2 stage fogger (dry) utilizing fuel and NOS orifices on 1 injector w/glide. I also have a 74063 Wideband linear 6.0 unit w/Afset 1 software that I need info on its ability to interface with ECU or is it standalone only. I live in Davison,MI and am looking for anyone whom can be of assistance.



  2. #2
    Join Date
    Dec 2002
    Location
    New York
    Posts
    377
    Is this the Gen VI?

  3. #3
    Join Date
    Mar 2008
    Location
    Mid Mich
    Posts
    62
    Quote Originally Posted by 68 SuperRam
    Is this the Gen VI?
    They didnt start using the Gen moniker until Version 7; Or so I've been told by David Ehrlich @ Autotrend EFI and a few others.

  4. #4
    Join Date
    Aug 2001
    Location
    Wilton, CA. (Sacramento)
    Posts
    3,001
    Country Flag: United States
    Quote Originally Posted by Pro X
    They didnt start using the Gen moniker until Version 7; Or so I've been told by David Ehrlich @ Autotrend EFI and a few others.
    they had a Gen VI version before Gen VII. Maybe it didn't say gen, but it's always been referred to as that. It's even called that on the Accel DFI website if you do a search. Much tougher to tune, few people have any experience with it, slower to tune, less resolution, etc. However, works great when tuned properly. Problem may be getting it to that point.

    Jody

  5. #5
    Join Date
    Sep 2004
    Location
    Kettering, OH
    Posts
    535
    I have an early Gen7 and you can't interface a non-DFI 02 box with it so I highly doubt you can do so with a Gen6.
    1967 Firebird Convert, Fuel Injected 462 ci, TKO 600
    http://1967firebird.atwebpages.com

  6. #6
    Join Date
    Mar 2008
    Location
    Mid Mich
    Posts
    62
    Quote Originally Posted by Hammered
    I have an early Gen7 and you can't interface a non-DFI 02 box with it so I highly doubt you can do so with a Gen6.
    74063 is an Accel DFI 6.0 Wideband. Are you running an Accel 77063 Wideband with your Gen7? I just picked up a 77022 GEN 7 for my 72 Chevelle 555 PT project and am considering picking up the 77063 Wideband to use with it.