Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 21 to 25 of 25

    Threaded View

    1. #1
      Join Date
      Nov 2004
      Location
      KC, MO
      Posts
      298

      Fixing front suspension geometry

      Okay, I have a 68 Camaro that I want to make into a long term, low-budget Pro-Touring car. I have heard all the nightmares about the bad geometry in the front end of the 1 Gen. Camaros. I want to create a car that is going to be a lot of fun on a windy mountain road and up for a very occassional track day or autocross event.

      I was planning on the G-mod at first, it seemed cheap and effective, but I have been reading around here and it seems the problem isn't just the lack of camber. So now I am considering Speed-Tech upper control arms or the AFX spindles.

      Which of these is the most cost effective way to get the gemotry issues under control? Do I need some combination of these things?

      I will also need to upgrade (again, cost is a huge consideration) to disc brakes when I do these mods.



      Any suggestions or personal experience with any of the above mentioned things, or a better solution?

      Thanks,
      J.R.





    Advertise on Pro-Touring.com