Norris Motorsports Billet LS7 Fuel Rails Available - Finally

[Mike Norris]

Hey All,

I have had my LS1, LS6, LS2 and FAST manifolds for a while now and I know a few folks were looking for the LS3 and LS7 versions. These rails utilize out proprietory size O-ring fittings which are superior to sealing to some of the competitors pipe thread and sealer applications. These are also CNC machined from a solid billet, not an extrusion as many other are. Nothing wrong with an extrusion, but with the billet we are able to make them have a slightly larger capacity. These are set up to accept the LS1 "standard" size injectors such as Ford SVO, Motron and such, not the shorty type LS3 and LS7 size injectors.

For the LS3 I have 3 red sets.

For the LS7 I have 3 red sets and 2 black sets.

Each standard set comes with billet stantions & hardware in black, 3 -6 to O-ring fittings and an O-ring plug standard. -8 Orings are available also to fit your configuration.

For custom configurations please feel free to PM me here or e-mail me at [email protected]

The standard sets are $229 plus $9.95 shipping via ground in the lower 48 states.

Please feel free to ask if you have any questions and you can order by calling me during the day at 407-616-2518 or via Paypal to [email protected]

Thanks.

Mike Norris