Results 1 to 4 of 4
Thread: Control arm bushings
-
02-22-2005 #1
Registered User
- Join Date
- Nov 2003
- Location
- Wisconsin in the woods
- Posts
- 332
Control arm bushings
I have all the parts to make my 68 Camaro full pro-touring and I have left over poly bushings for the uppper and lower control arms. I think the parts intercharge with Chevelle's which I would like to change them in my 69? Can this be done, I looked at a few on-line parts stores and the numbers are the same. Anybody know first hand?
Thanks
Brad
-
02-23-2005 #2
Registered User
- Join Date
- Nov 2003
- Location
- Wisconsin in the woods
- Posts
- 332
No takers? tt
Brad
02-23-2005 #3
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
im afraid to recommend any poly as to not get chewed out by Den! he he. If the numbers are the same they should work. Right? Wait whats your question? ok, oh, Hi Brad, the answer is yes!
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
02-24-2005 #4
Registered User
- Join Date
- Nov 2003
- Location
- Wisconsin in the woods
- Posts
- 332
Don't worry Vince
I don't think Dennis bits too hard. This is going to be a cheap build (at least I hope).
I was thinking it would work. I just don't want to buy parts for the chevelle and then have leftovers from the camaro.
Thanks again
Brad
Reply With Quote
