calculating brake force???

[Payton King]

Having the same problems. Have the 6 piston wilwoods on front with the 13 inch 2 piece rotor, 13 inch rear with the 4.

Pedal ratio is 5.3 or so with a custom twin master set-up and balance bar. Running a 5/8 on front and 3/4 in the rear. Generating 1000 psi on front and 800 psi rear.

It takes lots of effort to stop. After 4 or 5 hard stops to get heat in the pads it does much better. I am going to pull a pad this weekend to see what compound I am running, but from what I read above the bp20 is the ticket?