Results 1 to 9 of 9
Thread: Rear LS1 brake questions
Threaded View
-
08-19-2008 #2
Registered User
- Join Date
- Jan 2006
- Location
- Oregon
- Posts
- 1,773
1. Late model GM 10/12-bolt brake offset dimension = 2.77"
2. C5/C6 caliper bodies and LS1 caliper bodies are more or less interchangeable, so you can run the C5/C6 calipers in the LS1 pad abutment brackets, but you'll need to run the corresponding anti-rattle springs for the C5/C6 calipers. Here's a link to a write-up concerning this exact swap: http://phantomss.com/camaro/c5calipers/index.shtml
3. Directional vane rear rotors...none that I know of. DBA sells pillar vane versions (their "Kangaroo Paw" design) which are similar to directional vane rotors showing about 20% improved heat transfer properties over a conventional straight vane rotor.
HTH,
Tobin
KORE3It's what I does.
-
Reply With Quote
