Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Mar 2007
      Location
      Mission Viejo, CA
      Posts
      631
      Country Flag: United States

      TKO 600 Speedometer cable retention

      I have a TKO 600 GM version, and I am looking for a bracket that retains the speedometer cable. There is a drilled and tapped hole next to the where the factory cable engages into the transmission. I am looking for a clip that will retain the cable. Does anyone have information on this component? Thanks.



    2. #2
      Join Date
      May 2005
      Posts
      209
      What type of cable do you have? Ford? The cables we have have the retainer attached to the cable. The Ford style may be separate. I would check at your local Ford dealer. The Mustang 5 speeds use the same cable but with a different end at the speedo.

    3. #3
      Join Date
      Mar 2007
      Location
      Mission Viejo, CA
      Posts
      631
      Country Flag: United States

      Speedometer Cable

      I am using a factory replacement GM cable. Fit's perfect in the TKO. Just cant retain it.

    4. #4
      Join Date
      Jul 2007
      Location
      So Cal
      Posts
      263
      Quote Originally Posted by Later-A-body
      I am using a factory replacement GM cable. Fit's perfect in the TKO. Just cant retain it.
      Here is a picture of the style Jim supplies in their kits with the Ford gear. I have not heard of the OE GM cable mating with the TKO unless used with an adapter but I am no expert. The TKO uses a push in style with an o-ring seal and is retained by the metal tab and fastener in the picture. I suppose if your cable does have an o-ring seal and has the right gear you could likely make a tab and get a fastener.
      Tom
      1969 Chevelle

    5. #5
      Join Date
      May 2005
      Posts
      209
      Later
      If you're talking about the Muncie bullit that's not the right set up. Tom A has the right cable pictured.
      Thanks Tom_a




    Advertise on Pro-Touring.com