Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 34
    1. #1
      Join Date
      Jun 2008
      Posts
      37
      Country Flag: United States

      LS1 with a carburetor

      I know it is probably a good way to get me killed around here, but I was wondering if you could get an intake to put a carburator on a 98 vette LS1. I have come across a motor (mostly complete, with harness and computer) and I am kind of scared of the rats nest of wires. If I can't convert it, I will most likley sell it. Can you put a carb on this motor?



    2. #2
      Join Date
      Dec 2004
      Location
      Midwest
      Posts
      2,264
      Country Flag: United States
      Sure - the Edelbrock manifold leaps to mind as a simple way to adapt... you can use the Edelbrock / MSD ignition control and you're on your way.

      But the wires really aren't that scary when you get into it..
      Kevin Oeste
      V8 Speed and Resto Shop
      V8TV
      Muscle Car Of The Week
      V8 Radio Podcast

      All about us:
      https://www.v8speedshop.com


    3. #3
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      Or GMPP makes a complete kit: carb intake, fuel pump, and distributor.

      Just like the old days.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    4. #4
      Join Date
      May 2008
      Location
      SoCaL-Pico Rivera
      Posts
      1,138
      Country Flag: United States
      Painless wire also has a really no brainer set up.

    5. #5
      Join Date
      Jun 2008
      Posts
      37
      Country Flag: United States
      AHHH the good old days. If I don't sell it I will lookl into the gmpp set up.

    6. #6
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      don't be afraid of the wires for running EFI, it's not that bad really. The tunning is more of a problem but just leave that to a professional and you're done.

      carb works perfectly fine though. If that's what you prefer, you'll still get the benefits of it being an LSx.
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    7. #7
      Join Date
      May 2008
      Location
      SoCaL-Pico Rivera
      Posts
      1,138
      Country Flag: United States
      If you will sell PM me.

    8. #8
      Join Date
      Jan 2008
      Location
      Felton, DE
      Posts
      346
      Works great! You wouldnt believe how smooth running a carbed/cammed LS1 runs. I have a pretty big cam and it idles relitively smooth in general and revs perfect and cruises just like efi. Once you get your carb setup right its easy to tune with the MSD box.
      Attached Images Attached Images  
      1994 Z28 - 13.52@110mph 2.1 60ft T56, bolt-ons, suspension
      1978 Datsun 2+2 - 6.0L LS1 swap in progress
      1968 Firebird, 2820 dry- 2000 LS1, D&D Viper T56, RAM clutch/flywheel, 236/236 .651/.651 110+4LSA cam, victor JR EFI, 4150 TB, 42lbers, painless harness, Moroso 7qt pan, sfc, trac bars, 3" x pipe side exits, Telstars-30"MT streets/skinnies, mini-tub, 8.5" posi, richmond 4.56s, Hooker lLTs, Denny N20 DS, Fast dual wideband, Shotgun street scoop.
      http://www.myspace.com/shawnmacananny

    9. #9
      Join Date
      Jun 2008
      Posts
      37
      Country Flag: United States
      Did it cost an outrageous amount to do the conversion?

    10. #10
      Join Date
      Jan 2008
      Location
      Felton, DE
      Posts
      346
      My carburetor i rebuilt and setup was about $300 including the 50cc acclerater pump. (72 primaries, 76 secondaries, 6.5pv)
      Holley 97gph pump $100 or so
      victor jr intake - $300
      MSD ignition box - $320

      And thats all you really need.... optional things i have are

      Map sensor and connector - $40 (for part throttle timing advance)
      Fast dual Wideband O2 system - $420
      1994 Z28 - 13.52@110mph 2.1 60ft T56, bolt-ons, suspension
      1978 Datsun 2+2 - 6.0L LS1 swap in progress
      1968 Firebird, 2820 dry- 2000 LS1, D&D Viper T56, RAM clutch/flywheel, 236/236 .651/.651 110+4LSA cam, victor JR EFI, 4150 TB, 42lbers, painless harness, Moroso 7qt pan, sfc, trac bars, 3" x pipe side exits, Telstars-30"MT streets/skinnies, mini-tub, 8.5" posi, richmond 4.56s, Hooker lLTs, Denny N20 DS, Fast dual wideband, Shotgun street scoop.
      http://www.myspace.com/shawnmacananny

    11. #11
      Join Date
      Aug 2008
      Posts
      22
      very easy, cost about the same as using fuel injection though if you're starting from scratch.

    12. #12
      Join Date
      Aug 2004
      Location
      Montgomery, IL
      Posts
      359
      Country Flag: United States
      BS it does. To do EFI right, you would need to add a fuel tank with baffles, return line, modify the pick up and do a fair amount of wiring to mount the computer etc. You would also need to fab up a CAI/filter/MAF combo. Thats assuming he got a working computer and MAF with the motor. Adding the price of a custom tune into the mix, the cost is not even close.
      71 Formula, 455 SD/KRE D-Ports, Crower solid cam, TKO 600, 3:73 Eaton posi. 17" ARE 200s, , 1LE brakes, Koni, Rancho adjustable bars, Hotchkis springs

    13. #13
      Join Date
      Mar 2009
      Location
      overseas
      Posts
      3,434
      Country Flag: United States
      sorry I know it's a old thread. I'll get a LS1 for my 79 G-Body (monte carlo) soon, also want a T56 anytime later.
      I want to run a carb with it because it seems to be easier for me with all the fuel system. I also more like the "classic" carb & air-cleaner look for my car.
      but I don't know what I should get for my engine? what do you guys think about the Edelbrock Performer LS1 Intake Manifold Kit #7118?
      I know that ignition box that comes with the kit only got 6 different timing curves (means no adjusting the box) but maybe that's good for my needs? and which carb do you suggest for that kit?
      Kevin S. (overseas in Germany)
      1963 Chevrolet Impala 2d ht Coupe

      www.CruznArt.com
      CRUZN - Automotive Artworks

    14. #14
      Join Date
      Dec 2004
      Location
      bowling green,ky
      Posts
      845
      Country Flag: United States
      get the msd 6010 it has better pills and it is computer tunable. you can add a map sensor to it for partial throttle timing advance. the edelbrock kit isn't computer tunable.

    15. #15
      Join Date
      Aug 2008
      Posts
      167
      ^^^ agred and a 650 carb will do fine ask me how i know

    16. #16
      Join Date
      Dec 2004
      Location
      bowling green,ky
      Posts
      845
      Country Flag: United States
      i am running a avenger 670 in mine it does just fine

    17. #17
      Join Date
      Oct 2002
      Location
      Houston,TX
      Posts
      630
      If I was to do my motor setup all over I would just get a LS with a carb adnd be done with it, keep it simple so its on the road more
      James J.

    18. #18
      Join Date
      Jul 2006
      Location
      Manitoba Canada
      Posts
      28
      I run a 850 mighty demon/ vic jr, and msd 6012 with my stock long block 6.0 LY6. runs awesome, and the 850 mighty demon is jetted almost perfect out of the box.

    19. #19
      Join Date
      Aug 2004
      Posts
      26
      Anybody build an old school style carb LS motor - you know high comp, high lift rumpity rump cam, how's it sound and more importantly run.

    20. #20
      Join Date
      Mar 2009
      Location
      overseas
      Posts
      3,434
      Country Flag: United States
      with a carb/intake + MSD box and its wiring I still need this for my t56 swap into my 1979 Monte Carlo?

      http://cgi.ebay.com/ebaymotors/ws/eB...m=360119483663
      Kevin S. (overseas in Germany)
      1963 Chevrolet Impala 2d ht Coupe

      www.CruznArt.com
      CRUZN - Automotive Artworks

    Page 1 of 2 1 2 LastLast



    Advertise on Pro-Touring.com