Building for nitrous

[justanova]

I'm no expert but, from everything that I have read, the bottom end should be built to handle the total amount of power output desired....example: you want 600hp with the 2-300 shot of nitrous, then the crank/connecting rods/pistons etc... should be strong enough peices to support at least 600 hp. I have also read that the cyl. heads have to flow really well on the intake and exhaust sides in order to get all the burned gasses out or the nitrous will build up in the cylinders and kabloowie!

also with that big of a nitrous shot, you may want to "o" ring the block where the cyl. head bolt on so you don't blow a gasket



anyone feel free to correct me if I am wrong.