G- strand?????????

[paulk68]

This could be a silly question. But what is this modification i see this all over this site
Paul
Please no laughing

[dennis68]

It relocates the upper control mounting location to improve camber gain during roll/bump as well as raise the front roll center.

[Ralph LoGrasso]

You can find some good info on the Guldstrand modification, and I think a template on David Pozzi's webpage. Dennis basically nailed the description of it, though. I don't have the link handy, but just search his name and click on the link in his sig.

[BB69]

There are two ways to do the modification: drill new holes in the upper arm mount and then trim the mount as necessary, or cut the mount off and relocate it. I have done both. While the first method is easier, the second method looks better in my opinion. Here is a link to my site showing some pictures of the second method.

http://home.comcast.net/~grulich69/w...ue-skip-5.html

Ken

[JohnUlaszek]

It's worth doing a search on this topic as we have beaten it to death and it's seeing the usual three month topic cycle.

Having said that, here is my method
http://www.x1nova.com/Guldstrand.html

[68protouring454]

who is paul ruggles?? is he the paul that works for dse??
cool right up on the mod john, real nice fixture
jake

[JohnUlaszek]

Paul worked at DSE until they decided to move, and as we have been friends since we were in the Air Force together I was able to con him into using his talents to come up with some new ideas for my Nova. Too often the real talent behind these projects goes unmentioned so I like to give credit where it is due.

[68protouring454]

must be bummned to lose him, he made the aluminator sheet metal peice in the engine bay didn't he?whats he up to know
jake

[JohnUlaszek]

You might be confusing him with the Paul Morgan who still works for DSE as far as I know.