63 F100

[r.a.w.rods]

Could you tell us more about the console? I'm interested in making one for my ride and would like to know how you came up with it. It appears to be a couple of pieces of thin plywood attached to spacers, with a formed top. My biggest question is how did you create the top (Curves, etc)? Is it fiberglass with some body filler on top?

I'll try to tell you what I can but Im not the one doing the Interior. We knew to get a Radio,Speakers, A/C contorls, Cup Holders and the E-brake hidden In the middle would all have to come from a console that would look good and take the load. O this also helps cover the EFI wiring and computer in the floor, see pictures above. The side's are a plywood with a wood trim Inside to be albe to screw too. The top is a ABS plastic that was cut out and them Heated and bent to the forms we need. The small amount of filler you see is just to smooth our screws heads and other edges. I hope this helps some.