Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 10 of 10

    Hybrid View

    1. #1
      Join Date
      May 2005
      Location
      Fontana, CA
      Posts
      4,960
      Country Flag: United States
      Putting that much charge directly to the battery to support keeping proper 13.5-14.2 volts at the dash would nmean putting about 16 volts to the battery. That can kill a battery over a short time. The factory didn't run straight to the battery either.

      Nick R.
      69 Camaro - 383, 700R4, 12 bolt 3.55, Hotchkis, Bilstein, Global West, Morris Classic
      08 HHR SS - Still Stock for now
      Do you still believe in all the things that you stood by before? Are you out there on the front lines, or at home keeping score?
      Do you care to be the layer of the bricks that seal your fate? Would you rather be the architect of what we might create?


    2. #2
      Join Date
      Aug 2004
      Posts
      609
      I would suggest using a power junction on the firewall and run at least a 6-gauge wire from the alt. charge post to it and on the opposite side, connect your voltage sensing wire along with all your accessory wires as well. I'm doing a 66 Chevelle at the moment and I have (overkill, but wth it's exta wire, might as well use it) 1 gauge Taylor power wire running from the alt. charge post to a power junction. From there, I run a 1-gauge lead to the rear trunk mounted Ford style solenoid from the mini-starter. I also run a 6 gauge wire from the power junction to the battery for charging and a 14 gauge wire for the ignition lead to the solenoid. This car has a lot of custom electrical work so I am using weatherproof relay and aux. fuse panels on a custom bracket located where the factory battery location is under the hood. They will all see power via a bulkhead style connection feeding from the main power junction. All power for relays, fuses, etc. will come via a 4 gauge wire and a 150-amp fuse protection. I would strongly suggest using a 3-wire and ditch the 1-wire alternator. This Chevelle will see a 120-amp alternator but I can upgrade 6" cased alternators up to 175 amps. -Jabin
      Gmachinz Sales and Performance
      "updating the level of performance..."

      [email protected]
      *never argue with an idiot-they'll drag you down to their level and beat you with experience!*




    Advertise on Pro-Touring.com