Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 22

    Threaded View

    1. #18
      Join Date
      Sep 2006
      Location
      Chicago
      Posts
      355
      Country Flag: United States
      Pop the mass air flow sensor out and remove the bolts holding the case together. You will see two bars that span the inner circumfrence of the tube. Look carefully at the filaments that span between the two bars, they look like diodes ,if they have exceesive carbon build up clean them. This problem compounds with a K&N filter as the oil in the filter tacks onto those areas and attracts all incoming objects. Use a q tip and electrical contact cleaner to clean them and be VERY delicate as they are fragile . Hope this helps.

      Tony L





    Advertise on Pro-Touring.com