Phase2 on PRO-RUNNER nearly completed...

[gionni]

well, phase2 of my pro-runner project is nearly completed….

i bought a complete alterktion suspension from reilly's motorsports with airride-shockwaves, rack & pinion, 1.125" sway bar, upper and lower tubular arms, and more! rear cames a modified airbar-suspension from air-ride-technologies with shockwaves too, and 4-link! in same time i restored the complete underground of my RR, install subframe connetors, and a few other new parts...

here a few pics of works:
(and i try to explain the works on english..) ;-)

at first i parted my interior out… (for welding frame connectors on floor…)


here a few pics of underground before works begins…old, dirty, and with much surface-rust…
at first, i starting with the subframe connectors…so exhaust cames down…







then i cleaned up the underground…and the sheetmetal was really in good condition, clean and rustfree…



and this are the E-BODY subframe connectors!! for the 1971 b-body don’t exist frame connectors, but
it’s possible to modifing the e-body ones for an b-body…