Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7
    1. #1
      Join Date
      Mar 2007
      Location
      europe
      Posts
      666

      patriot header issue

      i just finished installing my patriot 3/4 length headers and am not pleased. pass. side went in great. driver side is a whole different story. the part number is PTE-H8013-1. which is supposed to be for a BBC in a 69 camaro with power steering. needless to say, i had to dimple #5 tube to get it in. now, the #3 tube seems to resting on the power steering housing. i don't get it. i have GM BBC frame stands, and energy suspension mounts for a BBC in my car. i can't figure out why they don't fit right. could it be that i got a bad header? i've heard good things about these headers from other members, and thought i would give them a try. can any one tell me how much clearance i should have from my header to the steering box. i know it shouldn't be resting on it like it is right now. any ideas or insight from anyone would be helpful. this sucks

      Jeff J. aka JJ

      1969 Camaro
      1952 Chevy Truck

      wir müssen Leben bis wir Sterben...


    2. #2
      Join Date
      Dec 2008
      Location
      Dardenne Prairie, MO
      Posts
      48
      Country Flag: United States

      Patriot Headers PTE-H8013

      I was just going to purchase these for my BBC Camaro, and read your post. So anyone else have problems or would it be better to by the hedman shorty's, these are 1-7/8" primaries which are nice though but maybe that is the problem the tube size is larger and it hits the steering box.

    3. #3
      Join Date
      Sep 2006
      Location
      Henderson,NV
      Posts
      2,870
      Country Flag: United States
      Been a problem since the beginning of Camaro time. Do you have stock exhaust port height? Do you have a stock size box. I personally couldn't dimple a pipe on a nice build like yours, but that's me. Send them back and buy a set of lemons.
      Todd

    4. #4
      Join Date
      Mar 2007
      Location
      europe
      Posts
      666
      yep, conventional headed BBC. stock subframe, steering box...etc. eventually i'll be able to afford a nice set of headers, like lemons or maybe fesler, or maybe just have the local chassis shop build me a set and get them coated. until then, i have to make do with what i got. another bad thing about these headers is that plugs no. 3&4 are impossible to get to with the header tube right in the way, also the plug boot rests right on the header. pretty crappy made headers if you ask me.

      Todd, thanks for the compliment, just doing what i can to make her my own.
      Jeff J. aka JJ

      1969 Camaro
      1952 Chevy Truck

      wir müssen Leben bis wir Sterben...

    5. #5
      Join Date
      Sep 2006
      Location
      Henderson,NV
      Posts
      2,870
      Country Flag: United States
      If you boots are right on the header pipe it's going to be tough to keep wires working. I have a couple that are really close. I used the black fiberglass boots and so far they are doing ok. I expect them to fail eventually however.
      Todd

    6. #6
      Join Date
      Mar 2007
      Location
      europe
      Posts
      666
      yeah, i've found that out. i've had to replace a couple already. hopefully when i can afford it, i can get some custom headers made that will give me plenty of clearance.
      Jeff J. aka JJ

      1969 Camaro
      1952 Chevy Truck

      wir müssen Leben bis wir Sterben...

    7. #7
      Join Date
      Nov 2006
      Posts
      152
      Country Flag: United States
      Do you want to sell them headers?




    Advertise on Pro-Touring.com