touring classic

[Chad-1stGen]

I can't speak to your specific kit. It might be worth mentioning that I bought a rear kit from them based on the C4 design.

It felt it was a quality kit but really didn't like the brake lines. I had a murderous time getting them to seal at the banjo bolt/caliper. I had to sand the mating surfaces A LOT to get them to seal properly. TC was responsive to my inquires and even sent me a new hose free of charge but I still had to sand the mating surface flat and flush. This turned a brake bleeding job into a 3 day affair sadly.



Brakes been on the car over 7K miles now and I haven't had any problems. They work fine.