Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 44

    Hybrid View

    1. #1
      Join Date
      Aug 2004
      Location
      SoCal
      Posts
      1,008
      My current plan is to get an 80% quarter and cut out a patch panel from that - mostly from the tail panel to close to the wheelwell. I'm not sure how high to go. If this fails and comes out bad, I figure then I can always replace with a full quarter if necessary. The metal around the holes is very thin - welding would easily punch through all the metal. The whole rear of the quarter is pretty messed up:








    Advertise on Pro-Touring.com