Intercoolers

[camcojb]

yes, I had Tim design one for my twin turbo LT1 Camaro. It requires some trimming of the front latch support, but the latch, etc. all work and clear. On the first one they built you'll see that the inlets came straight out, which required trimming the front bumper brackets. They since changed that to Larry's design to clear. Very nice piece. Supports over 1000 hp, and doesn't block the whole radiator, which can cause cooling issues. I was going to use it on an RS, but realize the headlight doors won't open. Not an issue with good lights on a 69, but would be with the solid doors of an earlier rs car. Standard front end, works and clears fine.






Jody