Results 1 to 4 of 4
Thread: Intake port size
-
05-24-2008 #1
New to Pro-Touring
- Join Date
- Apr 2008
- Posts
- 73
Intake port size
I decided to buy a set of new Brodix heads. I heard som much good about them so I feel comfortable with this decition. But,, I'm not able to decide what size on intake port to go for.
The engine is a csb 406
CAM: Intake Exhaust
Duration At 0.05 230 236
Lobe Separation 110
Intake: performer RPM and a Holley 750 vac.
I don't want the power peak above 5500 rpm.
Question 1.
Does the Brodix IK200 fit or shall I go for the race rite?
Question 2.
Is intake port size 180cc sufficient for an engine this size and this goals or shall I go for the 200cc heads??
The race rite head is CNC machine and have 2.055 intake valves.
Appriciates all input. Thanks.
-
05-25-2008 #2
Registered User
- Join Date
- Sep 2002
- Location
- San Jose, CA
- Posts
- 1,793
I don't think the Brodix heads are gonna get you what you are looking for. It sounds like you are going for a torque monster.
I would look at some Edelbrock E-tec's instead1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD
But ask me about my 2004 STi Auto-x car...
Just call me Brett
05-25-2008 #3
Registered User
- Join Date
- Feb 2005
- Location
- mo
- Posts
- 1,343
Brodix's heads are sweet, I would go 200-210 intake if your not gonna turn it very hard.
Thall shall fear no amount of boost, For thy bottle is with me.......
05-29-2008 #4
New to Pro-Touring
- Join Date
- Apr 2008
- Posts
- 73
I did ordered the 200cc Brodix heads yesterday. Thanks /emanuel
Reply With Quote
