Results 1 to 17 of 17
Thread: Body Panel Fitting
Hybrid View
-
02-09-2005 #1
Banned
- Join Date
- Nov 2003
- Location
- Maine
- Posts
- 1,076
guide coat
yes i always use guide coat when blocking, and i have recently started wet blocking the final coat of urethane primer, you can go either way dry or wet on the final sand, and i yet to like either way better, however uide coat is critical as well as your feel, watch the guide coat carefully to see where and where its not coming off, once urethane primed you need to use a polyester putty not bondo, these sand alot easier and the bodywork should be close before primeing so you will only have a few spots needing more attention after primer, goodluck
jake
-
02-09-2005 #2Thanks - I appreciate the help.
Couple other questions - I have polyester primer, but what about the urethane - is it the same as epoxy primer or different? It's not etch primer, right?
Also, do you recommend leaving the front and back glass off to paint, or is it just as easy to mask the glass as it is to mask off the open space?
Thanks,





Reply With Quote



