Results 1 to 6 of 6
Thread: DSE coilover question
-
05-12-2008 #1
Registered User
- Join Date
- Aug 2007
- Location
- CT
- Posts
- 799
DSE coilover question
I just got my coilover conversion DSE from the Big Brown Truck today..
I was reading the directions while at work and had a question. First of many i am sure.
It says the the coilover has to be removed to adjust the ride height!!
Why is that? Can you just jack up the corner so there is no pressure on it and tighten the castle nut??
Thanks
-
05-12-2008 #2
Registered User
- Join Date
- Apr 2001
- Location
- La La Land, CA
- Posts
- 2,241
LOL!
No, the coil over is mounted upside down, so you have to completely remove the entire assmbly from the vehicle to adjust ride height.
Our Chicane-LM coil over will allow you to adjust the height in car.
Tyler
-
05-12-2008 #3
Registered User
- Join Date
- Nov 2005
- Location
- Houston,TX
- Posts
- 1,159
Pays to read the fine print ahead of time, Nice setup otherwise
71' Nova - LY6, T56
05-13-2008 #4
Registered User
- Join Date
- May 2008
- Location
- Des Moines IA
- Posts
- 109
Is DSE's coilover different than QA1's? I've always bought the QA1 front coils and I adjust them "on car" all the time.
05-13-2008 #5
Registered User
- Join Date
- Aug 2007
- Location
- CT
- Posts
- 799
DSE uses Koni Coil overs ..
05-13-2008 #6
Registered User
- Join Date
- Sep 2007
- Location
- Denver
- Posts
- 325
See above....DSEs coilovers are mounted upside down and thus the adjustment ring for the coil is up in the spring pocket and the valve adjustment is on the top of the shock rather than on the side.
Reply With Quote
