Results 1 to 6 of 6
Thread: Tight radius 3" turn down needed
-
05-10-2008 #1
Registered User
- Join Date
- May 2005
- Posts
- 386
Tight radius 3" turn down needed
I have the exhaust dumping just in front of the rearend and the turn downs that I have now just plain stink! I don't like how far out they come out before turning down. Does anybody know of a tight radius bend that is in 3" tubing?
-
05-10-2008 #2
Registered User
- Join Date
- Dec 2002
- Location
- Lost Wages, Nevada
- Posts
- 2,683
You could get one of these and cut to fit... with ease.
...On fish, two fish... red fish, blue fish. Man that is funny... I normally dont ryhme. Damn kids are corrupting me.
05-10-2008 #3
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
LOL, and they said the beast could not be tamed!
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
05-12-2008 #4
Registered User
- Join Date
- May 2005
- Posts
- 386
Thats an idea...but I was hoping maybe an turn down was available but ya know we can always improvise!!!
05-16-2008 #5
Registered User
- Join Date
- Aug 2004
- Location
- Melbourne, FL
- Posts
- 1,046
Might want to check with Dr. Gas. They make some pretty tight radius pipes. Or they could probably make what you need.
67 Firebird Convert 455 +.060 Johnny Winters TH400 74cc KRE d-port flowed @ 310 cfm heads piston dished 16cc H-beam rods Comp Cam 305-AH-8 cam 108* LSA 253/260 @.050 duration .577/.594 lift w/1.65 rockers Ford 9" 3.55 Detroit Locker M/T Sportsman Radials 31x18x15 on Convo Pro 15x15s
Honest dad that 455 on the side of the block is a serial number
05-16-2008 #6
Registered User
- Join Date
- May 2005
- Posts
- 386
Thanks guys
Reply With Quote
