Results 1 to 4 of 4
Thread: Pre Body Shop Prep
-
05-08-2008 #1
Registered User
- Join Date
- Jan 2007
- Location
- CT
- Posts
- 782
Pre Body Shop Prep
Okay,
I am just finishing new quarter panel sections and dse tubs but I don't think the budget will let the car go to the body shop right away. I want to drive the car. Any sugestions to make the car "road worthy" while the funds are allocated? The work done is in just in metal. I have self etching primer, bondo, rust bullet ect....
any thoughts??
-
05-08-2008 #2
Registered User
- Join Date
- Mar 2008
- Location
- Wichita, KS
- Posts
- 375
epoxy primer, sand everything that you want primed with p180 grit
67 GTO, LS2, T56
WILWOOD, FORGELINE, RIDETECH
05-13-2008 #3
Registered User
- Join Date
- Oct 2007
- Posts
- 1,869
You may also want to think about Edging the car now (jams fenders doors trunk hood ect) This will save you some coin at the body shop and can be done pretty easy when its all apart
05-13-2008 #4
Registered User
- Join Date
- Jan 2007
- Location
- CT
- Posts
- 782
Thanks for the tips. I ideally would like to get the car on the bodys shop when the tubs/quarters are done but we'll see what the funds allow.
Reply With Quote
