Results 1 to 3 of 3
Thread: Front to rear balance
-
04-18-2008 #1
Registered User
- Join Date
- Jul 2006
- Posts
- 294
Front to rear balance
So my project is winding down and I need to order brakes next week. My problem is that I want to run 15" Cragar SS wheels but I also want to run Wilwood discs.
I am told the 12.19" setup will fit the rear (ford 9") but the largest I can run on the front is 11" (I am told it will be tight but will fit).
Will I be able to balance front to rear with larger disc in the rear? Application is 1966 Nova with M2 front suspension. 15" Cragar with 4.125" offset.
Any thoughs appreciated
Tg
-
04-18-2008 #2
Registered User
- Join Date
- Jul 2005
- Location
- Den Helder, the Netherlands
- Posts
- 1,148
Why wouldn't it be possible to fit 12.19" up front? If it will fit within the rear wheels, you should be able to use them on the front as well, right?
04-18-2008 #3
Registered User
- Join Date
- Jul 2006
- Posts
- 294
From what I am told... because of the offset on the caliper location. In the rear the caliper does not set as close to the wheel as with the front.
Tg
Reply With Quote
