67 fastback

[kmcanally]

315's would look sweet on your fastback....mini-tubbing this car should be easier than the Camaro since the inner wheel house can move in 1 1/2" inches without cutting into the frame rail.



With the backspacing I have there is 1 1/2" between the inside of the 275 tire and the leaf spring. So fitting a 295 would only require some minor "hammer" surgery to the front of the wheelhouse.

But if you are going to cut it up you might as well go all the way and get into the frame rail to fit up some 335 or 345's...I would love to see that on a early Mustang. After I finish this car that will be a future project...after I build my 427 stroker