Results 1 to 6 of 6
Thread: Timing Curve
Threaded View
-
09-14-2009 #4
Starting The Transformation
- Join Date
- Aug 2009
- Location
- Langley BC, Canada
- Posts
- 264
My set up is pretty close to yours and I run a total of 35 deg total including I believe 19 of mech adv all in by 3000 rpm (I guess that leaves me with 16 of initial and 25 including vac adv at idle and cruise). This was set up on a dyno too. I also have 9 deg of vac adv hooked up to FULL manifold vac NOT ported. This has made a huge improvement on idle performance and mileage.
Just my 2 cents
-
Reply With Quote
