Results 1 to 1 of 1
Thread: Front A-arm question
-
04-14-2008 #1
Registered User
- Join Date
- May 2007
- Posts
- 249
Front A-arm question
If I increase the distance between the balljoints on the spindle, and accordingly on the frame will it have any adverse effect? Basically both uca an lca mount from the top of the holes on the spindle, and I plan to flip the lower control arm to mount from the bottom up on the spindle, to increase steering clearance.
Nick Schiffer
2001 Silverado
Currently Fabricating Full Tube Chassis
Special Thanks to:
Air Ride Technologies - Wilwood Engineering
...back in the day
-
Reply With Quote
